Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Newbies, be quick on this one.
-
22nd May 2011, 01:11 PM #1
Newbies, be quick on this one.
I'm a newbie and just getting going with help from the great people on this forum. I got a helping hand to set up today from my darling wife. She tucks a little money from her pension away every pension day and when an emergency arrives she usually has something to cover it. Clever people these wimmin'
Today she walked it the door lugging a heavy bag and said happy birthday. ???? My bithday was in January ??
It was a plasic carry case with every imaginable drill you could think of. With additions like hole saws, Nut drivers and drill stops even a drill gauge. 204 pieces in all on 4 layers. I thought it must have cost a fair amount. Then I spotted the price $79.95. Gee that was a bit much to spend with money so tight I thought but wouldn't be so mean as to say it. "It was on special for $39.99." she said as if she could read my mind.
So I know they won't last for years but every size right down to pin size and right up to 32 mm flat wood bits and a 27 piece screwdriver set and I was in drill heaven. No more hunting for that drill you have the biiger size and the smaller one but not the one in the middle. I know the more affluent will say I should have gone for the quality but I find drills last a fair while with timber so even if they last me 2 years it's still good value for money.
The only thing I couldn't figure out were 3 plastic nozzle looking bits with a serrated ring and a spring inside. The only part I can find on the list is 3 screw finders. I can't figure out how it's used and how it finds screws. I just look in my screw tin but these won't help. Any ideas please ?
So be quick they only went on special Thursday and I got the last one here. Mitre 10 if you have one close.
Good luck ... Stu
-
22nd May 2011 01:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd May 2011, 05:16 PM #2Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
Sounds like those plastic things are screw holders. You insert a screw, then fit the tube onto the shank of the screwdriver, and it holds the head of the screw and stops the blade sliding out of the groove.
-
22nd May 2011, 05:53 PM #3
Sounds right. I had one once designed for slotted screws. Didn't work particularly well.
Got to love the wifeMichael
Wood Butcher
-
22nd May 2011, 05:59 PM #4
Even if the drills are not much chop the carry case to keep everything sorted can be worth its weight provided it does not break. If you put things back after use you sill know what has gone missing (or broken) and needs replacing.
Some items you will use often and replace, other items you will seldom use and then one day it will be I have just the right tool and it will save you so much time and $.
-
22nd May 2011, 06:39 PM #5
I bought one of these several years ago (same price), and have had a huge amount of use from it. The case hinging is starting to fall apart, but is still usable. Can't go wrong in my opinion.
Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
22nd May 2011, 07:30 PM #6Member
- Join Date
- Feb 2010
- Location
- Hervey Bay, QLD
- Posts
- 89
I too got on of these type of kits several years ago
Drill bits, brad points, masonary, spade bits, drum sanding attachments, heaps of screwdriver fittings, drill depth collars and and few other odds and ends.
Ive broken a few of the smaller drill bits but just replace them with cheapies I get from the market. Buy them in packs of 5 and just chuck them out when done with.
Only thing I dont use is the masonary ones, as I have a nice set with my Ramset drill. I have nice full sets of spade bits and drill bits, But always goto this cheaper one first for general around the home stuff.
-
22nd May 2011, 07:46 PM #7
G'Day Stu,
Another WELL DONE to your best girl.
Cheers, Crowie
-
3rd June 2011, 03:18 AM #8
It's nice having a wife who just comes home with a lovely surprise. She's battling too. I give her a big chunk of pension but it just doesn't go far but we don't have anyone after us for not paying bills. I don't know how she does it. I know it's agony just to drive down town with a massive chunk of stainless steel in her leg instead of a knee and these cold mornings give her curry but she makes sure I have my breakfast spot on time because I'm diabetic and she's forever going to sleep watching TV because she's so busy all day. It really makes me mad to see the stuff she does and she refuses to let me do anything in case I have another fall, she says. At least she's happy with me having a workshop because at least all my mess will just be in one room. I don't know about the dust though.. That tends to move around. But my friend Jan sent me a heap of face masks so at least I won't be breating it in. Good On'yer Jan.
I'll treasure the drill though. I even thought of hanging it open on the wall so I don't have to keep opening it every time I need a drill. They're not for a pro, I know that but with care they will last a long time. If I break one I'll replace it with a good quality one. Building boats gave me the first time I've ever measured a drill to make sure it's the right size using a micrometer. You've got to be spot on otherwise something gets out of alignment and everything shakes to pieces or you get a bad leak. It's nice having a bit of precision instead of close enough is good enough.
Bye all Thanks again for the advice, Stu.
Similar Threads
-
Some Useful References, especially for newbies.
By Ropetangler in forum METALWORK FORUMReplies: 6Last Post: 10th July 2010, 11:57 PM -
For Intrestered Newbies
By Ashore in forum WOODWORK - GENERALReplies: 0Last Post: 13th June 2009, 11:35 PM -
Newbies Projects
By daff in forum WOOD WHISPERING WOMENReplies: 9Last Post: 19th November 2008, 01:41 PM -
For the newbies
By TTIT in forum WOODTURNING - GENERALReplies: 4Last Post: 14th September 2006, 05:03 PM