Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Small re sawing job, Melbourne
-
2nd December 2016, 08:12 AM #1Member
- Join Date
- Jul 2014
- Location
- Australia
- Posts
- 61
Small re sawing job, Melbourne
hi Guys,
I have a slab partly dress of African Mahogany 1600mm x 600mm & 35mm thick that I am looking to get machined into smaller planks suitable for box making, hoping to get some 150mm & 200mm wide planks.
Anyone here interested, please also let me know what cost I am looking at
i can deliver, and i am based in Frankston Area
thanks Guys
-
2nd December 2016 08:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2016, 07:08 PM #2
You can cut that with a hand held power saw.
I am learning, slowley.
-
2nd December 2016, 08:23 PM #3
Pagie, I think Tonycrh wants more than just ripping the 600mm wide down to about 200's. I think he wants the resulting 200 x 35's resawn down to probably two or three thinner boards each for box making.
Cheers
DougI got sick of sitting around doing nothing - so I took up meditation.
-
2nd December 2016, 09:06 PM #4
It says he wants 150 and 200 wide planks. Boxes can be any size.
I am learning, slowley.
-
5th December 2016, 08:32 AM #5Member
- Join Date
- Jul 2014
- Location
- Australia
- Posts
- 61
-
5th December 2016, 11:54 AM #6
Did you get the slab cut yet? If you bring it I can cut it.
I am learning, slowley.
-
5th December 2016, 01:25 PM #7
I can Resaw and machine but I'm in Warburton which is a bit of a hike, can do it while you wait
Cheers
DJ
Similar Threads
-
Small milling required - Melbourne area
By thumbsucker in forum SMALL TIMBER MILLINGReplies: 7Last Post: 4th February 2016, 11:08 AM -
Needing Some For A Small Surface Grinder Job in Melbourne
By thumbsucker in forum METALWORK FORUMReplies: 40Last Post: 27th August 2015, 02:52 AM -
Another Melbourne small-shed beginner
By aeberbach in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 11th January 2014, 07:57 AM -
Small box hardware in Melbourne
By LGS in forum BOX MAKINGReplies: 4Last Post: 18th October 2007, 12:41 PM