Thanks: 
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Resaw help
-
30th June 2023, 04:29 PM #1
SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 651
Resaw help
Need to resaw a board 190mm high. Unfortunately my bandsaw only goes to 170mm.
Could cut halfway with tablesaw then by hand, but didn't plan ahead enough to leave enough thickness to do that.
Anyone in southwest Sydney area who can help out please.
cheers
shane
-
30th June 2023 04:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th June 2023, 08:59 PM #2
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 11,186
G'Day Shane,
If no one local comes to your aid,
you could try Dean at Living Timbers at Penrith as he has just purchase a "resaw bandsaw" complete with an "automatic feeder"
Cheers Peter
-
1st July 2023, 10:49 AM #3
GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,135
cant take the cast iron table off and make a temporary thinner one out of ply or something to try and scrape in the 20mm?
-
1st July 2023, 11:47 AM #4
GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
Originally Posted by havabeer69
Can't see how that would help, the kerf of the blade can't be altered.
Edit: I just got it.
You're talking about the bandsaw, not the table saw.
-
1st July 2023, 11:54 AM #5
In An Instant Your Life Can Change Forever
- Join Date
- Jul 2012
- Location
- "Brownsville" Nth QLD
- Age
- 66
- Posts
- 4,435
My interpretation is that the kerf width is only an issue on the OP's table saw, and height on the bandsaw. Originally Posted by aldav
Can't see how that would help, the kerf of the blade can't be altered.Mobyturns
In An Instant Your Life CanChange Forever
-
2nd July 2023, 10:06 AM #6
GOLD MEMBER
- Join Date
- Sep 2010
- Location
- Sydney
- Posts
- 1,983
Can do it here if you want to travel?
Alternatively have you got Flettys number?
-
2nd July 2023, 10:17 AM #7
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 11,186
It’ll be a long distance call as Fletty’s in Scotland! Originally Posted by Pac man
-
2nd July 2023, 10:23 AM #8
GOLD MEMBER
- Join Date
- Sep 2010
- Location
- Sydney
- Posts
- 1,983
ah yes but there is a way
-
2nd July 2023, 10:48 AM #9
GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Shane, give me a call, you can borrow my 2mm kerf blade or do it here on either the TS or BS.
CHRIS
-
3rd July 2023, 07:38 AM #10
GOLD MEMBER
- Join Date
- May 2015
- Location
- Brisbane
- Posts
- 1,148
So the board is 190 wide but how thick is it and what do you need to get from it?
I had the same situation a few days ago where i had a 290 board that was to wide for the jointer so i ripped it in half 2 x 143 did the trimming and resewing then joined it back together.
Reply With Quote
Similar Threads
-
Need help with resaw
By russell131 in forum WOODWORK - GENERALReplies: 2Last Post: 4th July 2021, 03:48 PM -
Resaw blades
By derekcohen in forum BANDSAWSReplies: 18Last Post: 24th June 2019, 10:00 AM -
Resaw problem
By Pasho in forum BOX MAKINGReplies: 6Last Post: 6th September 2009, 05:45 PM -
To resaw or not to resaw?
By Carry Pine in forum WOODWORK - GENERALReplies: 6Last Post: 25th November 2008, 07:42 PM -
The best way to resaw...
By BozInOz in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 8Last Post: 5th March 2008, 09:09 PM
