Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: The Scrap Bin
-
18th April 2015, 03:19 PM #1Awaiting Email Confirmation
- Join Date
- Feb 2008
- Location
- Peakhurst
- Age
- 67
- Posts
- 1,173
The Scrap Bin
I have a few scrap bins around the workshop for off-cuts so decided to have a little bit of re-organisation.
In going through what was under the bench and the off-cuts I realised I had more than enough timber to make a few boxes.
My bench chisels (they were under a heap of off-cuts) usually live under the bench in what is left of a cardboard box.
So this is what happened and now I've got a bigger mess to clean up. Still got a few boxes to finish for the mortise/firmer and other beveled edge and assorted chisels.
P1010108.jpg
P1010109.jpg
-
18th April 2015 03:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th April 2015, 09:24 PM #2Senior Member
- Join Date
- Sep 2003
- Location
- Ipswich Queensland
- Age
- 69
- Posts
- 152
Nice work from the off cut bin.
-
18th April 2015, 11:10 PM #3Awaiting Email Confirmation
- Join Date
- Feb 2008
- Location
- Peakhurst
- Age
- 67
- Posts
- 1,173
Thanks. Bits of pine, jarrah, tassie oak/vic ash, red cedar and oregon are all there to be used.
Don't want to waste them.
-
19th April 2015, 09:49 AM #4
They look far better than the cheap Chinese boxes Steve
-
19th April 2015, 11:32 AM #5Awaiting Email Confirmation
- Join Date
- Feb 2008
- Location
- Peakhurst
- Age
- 67
- Posts
- 1,173
Similar Threads
-
The Scrap Man
By DSEL74 in forum METALWORK FORUMReplies: 9Last Post: 7th January 2015, 02:52 AM -
From the scrap bin
By John Samuel in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 1Last Post: 23rd December 2013, 09:55 PM -
More Scrap from Hughie
By wheelinround in forum WOODTURNING - GENERALReplies: 4Last Post: 21st April 2010, 06:03 PM -
OK to scrap this hand-saw?
By Skew ChiDAMN!! in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 7th January 2009, 01:34 PM -
Toys from Scrap
By Pablo in forum WOODWORK PICSReplies: 11Last Post: 13th January 2004, 10:31 PM