Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Timber ID - Help please
-
7th December 2017, 02:13 AM #1GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
Timber ID - Help please
There is a reason the lord gave seagulls wings and that was to beat the rest of us to the tip..... But, before the tip truck came I managed to lift from the roadside a few logs from a recently felled tree. Problem is I have no idea what sort of tree it was. The inside has some nice grain with a blue/green swirl (seems to dissipate/disappear near the dried cut ends). yes the wood seems to be quite green so I have sliced almost 20mm thick and stacked away for a rainy day next year.......... Any help would be appreciated.
-
7th December 2017 02:13 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th December 2017, 10:55 AM #2
A wattle of some sort perhaps. Good to see wood scavenging is still active.
Regards
John
-
7th December 2017, 12:23 PM #3GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,746
Looks like Acacia to me.
-
7th December 2017, 05:33 PM #4
-
7th December 2017, 07:48 PM #5
Nice Grain colours,good pick up however sealing the ends now would be a good idea as has been suggested to slow moisture loss & let the wood cure slowly.
You could slice it & put layers in stick but it would still need sealing.Johnno
Everyone has a photographic memory, some just don't have film.
-
8th December 2017, 02:01 AM #6GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
-
8th December 2017, 02:47 AM #7GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
I have actually sliced both logs into 20mm slices, and have stacked them, and I will try and seal the ends for protection. if it works and I can get enough to make a nice box then i'll be a happy camper, if not no love lost but more importantly no $ lost. Its also a shame really as it wont be ready for when 'd like, April.
-
8th December 2017, 10:38 AM #8GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
The coloration is almost certainly from fungal attack, either the fungus that killed the tree or else a fungus that got in after it dried. Some such colouration - spalting - remains when the wood is dry and gives interesting figure. Some spalting goes soft and will need hardening with an epoxy hardener/fungus killeer to keep the wood stable (nasty smelling stuff, use only with lots of ventilation).
Identifying trees completely often requires either a wood technologist ($$$) or seeing the leaves, flowers, fruit etc. - except with really distinctive and well-known and recognised timbers.
David (PhD in botany).
-
8th December 2017, 11:39 AM #9Novice
- Join Date
- Feb 2012
- Location
- Beremboke Vic
- Age
- 76
- Posts
- 15
-It looks like the "Black Wattle" I have growing on my place. If it is, it dries very Brittle and will blunt a Chainsaw. It is full of Silica. I have seen sparks fly. Furious burning Firewood. Hope I am wrong. Jeff
-
8th December 2017, 05:20 PM #10GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 69
- Posts
- 1,073
Could be Norfolk Island Hybiscus. You need to take a very close look at the grain for a very fine nearly invisible medullary ray.
Similar Threads
-
Finishes on open grained timber versus closed grain timber
By Pauls321 in forum FINISHINGReplies: 5Last Post: 15th November 2012, 05:35 PM -
Looking to purchase Jarrah timber, Jarrah Burl timber or Marri timber measurements >>
By EduardElGran in forum WOODWORK - GENERALReplies: 1Last Post: 10th April 2012, 08:42 AM