Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
15th January 2014, 01:02 AM #1New Member
- Join Date
- Oct 2013
- Location
- Sydney
- Posts
- 2
Tool recommendation - Huon Pine Sculptures
Hi
I am completely new to wood carving.
I would love to start carving small animals from Huon Pine. Things like life-size frogs and lizards.
I am just looking at the Carba-Tec website at the moment, interested in getting some Pfeil tools.
If you were going to recommend between 4 and 8 tools for a beginner who wants to do this sort of carving, what tools and sizes would you recommend?
Look forward to hearing from those with more experience - thank you in advance.
Regards
Pete
-
15th January 2014 01:02 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th January 2014, 02:27 AM #2SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Perth
- Age
- 50
- Posts
- 728
What about this Company from here in Perth.
Arbortech Woodworking | Woodworking
I own the mini turbo and it works fantastically.
Cheers
-
15th January 2014, 03:01 PM #3
Good Morning Peter
Your local TAFE probably runs a wood sculpture course.
Also, there are lots of videos on the web - many free.
My sculpting friends all insist that carving is all about technique. The tools then complement your technique.
From my attempts at carving I have not achieved any level of technique. Cannot blame the tools!
Fair Winds
Graeme
-
15th January 2014, 07:39 PM #4GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
7/14, 5/12, 12/10 and 1/12
I do a lot of carving of small animals - mostly birds - mainly to use for photographic purposes. A photo is attached, so you can see what I do - its probably concentrating more on the painting then the carving, though I do occasionally do detailed stuff as well.
I have a set of 8 Pfiel tools and after the roughing-out stage the main tools I use area as follows:
7/14 - (Shallow gouge) I use this for about 70% of the work, or maybe more.
5/12 - (very shallow gouge) I use this about 10% of the time, when I need less curve
12/10 - (Veining tool). I don't use it much but its necessary when you want to get into a groove - like frogs legs where they lie against the body.
1/14 - (Flat) I use this occasionally, mainly when I cant get a rasp into somewhere to smooth out.
The other 4 I never use.
The other tools that are very important to me are in the photo attached.
I use the fishtail gouge mounted in an old turning tool handle because it allows me to use two hands, well spaced. I use it on the blank to quickly remove the bulk of the waste (roughing out). I use it because using two hands it overcomes all resistance. It reduces the stress on my hands.
The other thing is a rasp - more a riffler then a rasp. I buy these from Mcjings. Very crude, very pointy teeth. Removes timber and flattens amazingly fast. These do the step before sanding.
I think with carving something like this, there are three things you need to get right, and once you get them right its as easy as.
1. a way to hold the workpiece solidly - at any angle you want. You need a decent carving screw. I made mine from plumbing fittings - works OK but not ideal.
2. compliant timber. I use jelutong, white beech and huon pine. For learning, get yourself some jelutong (eg. Matthews Timber or Trend Timber). Very easy to carve and very compliant - ultimate learning timber. I have found white beech a bit furry. Huon pine is nice, but a bit hard for learning.
3. dead sharp tools.
Then I have a bandsaw, for cutting out the blank. I usually print off a 2D of the image from my PC, paste it onto 50mm jelutong, and then cut it out roughly on the bandsaw.
So to summarise, the process I follow is:
1. Cut out the blank roughly using a bandsaw.
2. Rough it out using the two-handed fishtail gouge - removing big chunks of timber.
3. Carve it - using the 7/14 for most of the work.
3. Detail it using the 12/10 and the 1/14.
4. Go over it all with the rasp.
5. Sand it smooth.
cheers
Arron
carving tools.jpgdecoys.jpgApologies for unnoticed autocomplete errors.
-
19th January 2014, 10:23 PM #5New Member
- Join Date
- Oct 2013
- Location
- Sydney
- Posts
- 2
Thank you
Thank you all for your recommendations, really appreciate the guidance (especially from you Arron).
Thanks all.
Pete
-
22nd January 2014, 06:57 AM #6GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
If you look away back in the Woodcarving Forum, you will find a thread called "Star's Sharpening Journey."
Star invited me to toss in what I was doing at the time. It's a bit windy but you'll get the idea. I do it all freehand with the kit that you will see.
Most good carving tools hold a "carving sharp" edge for about 30 minutes. The implication is that you have to learn how to sustain that edge. Some tools from some bladesmiths will arrive sharper than others. You have to learn how to fix that.
Sweeps range from 1 (flat) to 12 (deep U shape.) The second number is the width of the edge in mm.
So a 2/20 is almost flat, a 5/35 has a distinct shallow curve to it and a 9/15 is very much a finger shape.
Those are my 3 big gouges that I can drive with a 950g, lead core carving mallet.
To start, a wood carver's mallet in the 350g-500g range is a good idea.
Pfeil makes tools in 2 series, the 'D' series just has shorter shanks and slightly smaller handles. Their 8/7 is otherwise identical (as I have both of those).
Any questions, the woodcarving forum will contribute well informed answers (like Aaron's post here)
Lots of carvers working smaller projects use palm tools. Can't comment as I have/use none of them.
Similar Threads
-
quick changing tool post recommendation
By thorens in forum METALWORK FORUMReplies: 54Last Post: 27th August 2013, 11:18 PM -
Clear pine finish recommendation
By duong01 in forum FINISHINGReplies: 4Last Post: 25th April 2012, 03:00 PM -
Huon pine
By CentralianAlien in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 2Last Post: 28th November 2009, 12:57 PM -
Tool Recommendation - Nailgun?
By Quasimodo in forum HAND TOOLS - POWEREDReplies: 9Last Post: 2nd March 2008, 01:26 PM -
Huon Pine Oil
By Hagrid in forum FINISHINGReplies: 4Last Post: 30th June 2005, 02:24 PM