Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
5th May 2019, 09:28 PM #1Senior Member
- Join Date
- May 2019
- Location
- Canberra, Australia
- Posts
- 306
Triton MK3 tabletop assembly issue
I am having an issue assembling my Triton MK3. The tabletop is too short for the frame and only fits one pair of holes - if I attach one side the other comes loose. I can't find a way top lengthen the tabletop, narrow the frame or move the mounting screws. Can anyone help?
Image album:
https://imgur.com/a/45udo2A
-
5th May 2019 09:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th May 2019, 09:36 PM #2
All is correct. You need to push the locking pins in and rotate by 90 degrees.
There is a lug on the side of the pins that fills the gap.
-
5th May 2019, 09:38 PM #3Senior Member
- Join Date
- Oct 2008
- Location
- Brisbane
- Posts
- 145
That’s the way it’s supposed to be.
Do this:
Push the table top hard against the built in knobs on one end. The table top should locate into these pins.
Next, turn the L shaped locking bars horizontal. These L shaped bars will have little tabs that stand out from the round bar rod, like little wings. When these L brackets are horizontal, the wings will line up with slots in the end plate. Push them thru as far as they’ll go, then the ends of the L bracket lock into the holes in the table top. When this is done, turn the L brackets down so they line up vertical, pointing down. This will lock everything up
Sent from my iPhone using Tapatalk
-
5th May 2019, 09:54 PM #4Senior Member
- Join Date
- May 2019
- Location
- Canberra, Australia
- Posts
- 306
Silly me!
Thanks guys
Similar Threads
-
Triton TRA01 Winder handle assembly
By simops in forum TRITON / GMCReplies: 18Last Post: 12th October 2016, 11:32 AM -
Triton Mk3 Assembly/instruction manual
By Zaphod in forum TRITON / GMCReplies: 2Last Post: 29th June 2012, 05:40 PM -
Sliding Triton WC2000 Plate Assembly
By Knurl in forum TRITON / GMCReplies: 6Last Post: 25th January 2011, 03:59 PM -
Triton 2000 workcentre, switch assembly
By ftwildstrike in forum TRITON / GMCReplies: 4Last Post: 26th November 2010, 07:28 AM -
Assembly of Triton 2000 Workcentre
By Kylee Tramm in forum HAND TOOLS - POWEREDReplies: 4Last Post: 9th September 2010, 09:17 AM