Results 46 to 60 of 315
Thread: WIP - Maloof inspired rocker
-
26th October 2016, 08:16 PM #46GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
-
26th October 2016 08:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th October 2016, 08:31 PM #47GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
WIP - Maloof inspired rocker
I glued up the adder blocks for the rear legs last night and this morning. They're just a small block that makes the seat joint area thicker therefore making a stronger joint. It looks a bit strange now but it will be sculpted and blended in later.
I spent way too long selecting the right adder blocks as I wanted the grain to match and look seamless.
I glued them a little proud of the surface and squared it up with my number 5
IMG_2850.jpg
These blocks get a 6 degree bevel cut on them so they splay out. I made a 6 degree jig for my table saw and cut one of the tapers.
IMG_2853.jpg
If I get time tomorrow I'll select the timber for the arms and rough cut them out on the bandsaw.
Besides the back slats and the arms there isn't much more I can do until the router bits arrive.
-
27th October 2016, 10:06 AM #48GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
I used the Maloof finish then applied a natural wax. I found that the slats and arms took quite a while to do. They have to be matching so I was going too and fro making small changes to get them the same. A lot of rasp work.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
28th October 2016, 03:59 PM #49GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
I've decided on these wheels - Holey Galahad - Round Fine Green [47853 RFG] — Carving Tools Australia
I've done quite a bit of research and they get great reviews. I like the fact you can see where you're grinding.
Now the question is- how important do you think having a good quality angle grinder is? I have a cheap ozito grinder that I use to cut metal etc. I use it for for very rough jobs and don't think it will be suitable due to vibration etc.
Does anyone recommend a good quality angle grinder with low vibration?
Thank you
-
28th October 2016, 04:59 PM #50Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
-
28th October 2016, 06:41 PM #51SENIOR MEMBER
- Join Date
- Jun 2007
- Location
- Blue Mountains
- Posts
- 817
Hi Andy,
I've got a Bosch PWS1000 which I rarely use. You're welcome to borrow it for your build. I could bring it up tomorrow.
Cheers,
ajw
-
29th October 2016, 07:39 PM #52GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Hi Peter,
The adder blocks face inside the chair. I took a couple of photos which should make it clear.
IMG_2875.jpg
-
1st November 2016, 08:46 AM #53GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
WIP - Maloof inspired rocker
I ended up ordering the Holey Galahad fine wheel so hopefully I receive it this week so I can start practicing.
The only progress I've made is I've sanded some of the back slats in preparation for tracing the second template.
Once these router bits arrive I'll be able to make significant progress as these bits are holding up the build.
I'm also looking for some input for a secondary wood. The rockers are made from multiple (I think 6) thin pieces that is glued to a form to create the shape. They are often made with a contrasting wood eg maple but I'm thinking of using Jarrah.
I know both are dark tones but wondering what your thoughts are?
I'll be using the same wood for the screw hole plugs also.
Cheers
-
1st November 2016, 12:35 PM #54
Hi groeneaj, I think those wheels are a great choice, unfortunately I saw them after I purchased the solid ones. You won't need much practice to get a good result with them. I made the low back dining chair from the Brock plans and the seat was a breeze with the wheel on the angle grinder. They are not as aggressive as they appear in hand and a light touch actually produces a very acceptable finish for the next stage. Have you thought of silver ash for the rockers, I think it would be a great choice for contrast against the Walnut.
I wish you well in your project and congratulations to you both for your first child. Hope you make it before the baby, there are a lot of sanding hours to go yet.
Cheers, Ian
"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
2nd November 2016, 07:45 AM #55GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Hi Ian,
I've considered a lighter coloured timber such as maple but not silver ash. I like the idea as it's an Australian hardwood. My other option is Huon pine which I really like working with.
I'd love to see a pic of the low back dining chair. It's another chair that I'd like to build in the future.
Cheers,
Andy
-
2nd November 2016, 12:09 PM #56
-
2nd November 2016, 09:40 PM #57
Low back chair
OK here you go Andy, not a finished photo but one just after glue up and not a real good photo at that.
It's mango and ebony for the plugs. It was my first chair build so a huge learning curve for me but a most enjoyable one.
Cheers, Ian
LowBackChair.jpg"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
3rd November 2016, 12:48 PM #58GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
-
3rd November 2016, 04:22 PM #59Senior Member
- Join Date
- Oct 2016
- Location
- New Zealand
- Posts
- 240
Wow how inspiring.
-
4th November 2016, 02:56 AM #60
I used the Maloof formula Andy, I still use it on a lot of my projects.
If you are not aware of it its one third each of BLO, Tung oil and polyurethane. For the final coats it has some wax added also.
Cheers,
Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
Similar Threads
-
Maloof inspired low back dining chair.
By kcam in forum WOODWORK - GENERALReplies: 35Last Post: 18th April 2012, 08:40 AM -
Maloof Inspired Music Stand
By lewisc in forum WOODWORK PICSReplies: 6Last Post: 23rd June 2011, 01:05 PM -
Sam Maloof Inspired Chairs
By kcam in forum WOODWORK - GENERALReplies: 2Last Post: 26th March 2011, 09:20 AM -
Maloof’s chair, Rocker’s plan, my way (WIP)
By Wongo in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 169Last Post: 29th October 2007, 07:39 PM