Results 16 to 22 of 22
-
31st December 2022, 06:44 PM #16
Great job on the project and the photos
Dallas
-
31st December 2022 06:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th January 2023, 07:43 PM #17SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- melbourne
- Posts
- 383
Some more pics of potting bench.
I didn't have enough wood from the skip to finish the bottom shelf on the right.
But I do have some cypress pine offcuts from when I made some large Versailles style planters a couple years ago.
They should be fine for that shelf.
final frame glue up.JPG Glue in panels 1.JPGglue in panels 2.JPGfull pic.jpg magpie 1.JPG
The last pic is Mr. Magpie who is the male of a pair that frequent our backyard, along with Mrs. M and their two offspring.
He gave it the once over.
Just need to move it into position now.
And Im not sure if it will be oiled and left to go grey or painted.
Thats up to the recipient who will advise.
Cheers
Frank
-
5th January 2023, 09:10 AM #18
I'm sure Mrs mattocks will be very pleased. Did you glue all the slats in where the clamps are?
Dallas
-
5th January 2023, 10:07 AM #19SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- melbourne
- Posts
- 383
Yes all the panels are glued in.
I used Titebond III.
Ive used it before outside on 5 very large planter boxes with good results.
-
7th January 2023, 10:58 AM #20SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- melbourne
- Posts
- 383
potting bench finished
The potting bench I made has been finished and is in its position ready to be used.
I estimate the cost to be well under $100.
Julie decided she wanted it painted. The paint was $60 and by far the most expensive part.
We had a paint brush which can still be used again.
I also bought a 2400mm length of treated pine 145 x 19 which was $9.
I attached this to the rear of the top with a 75m overhang as the pavers wouldn't allow the bench to sit flush against the shed wall.
Now it does with this attached and will stop small items falling down behind it.
I had the glue and the dominos I used so there is a cost there of course.
Also the time I took to make it has value, but as I said originally, this is my hobby.
I do it for the enjoyment and being able to produce items of use.
Julie is thrilled with it.
Thanks for watching.
Frank
IMG_4436.jpgIMG_4437.jpgIMG_4438.jpg
-
7th January 2023, 01:13 PM #21
That ended up looking very nice, and the dark stain looks good against the brickwork.
I now have to replace a panel / board in the top of the one I built. SWMBO was standing on it the other day putting shadecloth up over the steel framed shade house that I built her (from mining surplus drill rods).
I heard a "snap" and she had gone through the top of the bench. I was very careful in what I said when this happened.
-
8th January 2023, 09:40 AM #22
That's come up a treat. That dark grey goes well with so many things.
Dallas
Similar Threads
-
Potting Table almost from pallets
By nicked74 in forum WOODWORK PICSReplies: 5Last Post: 26th June 2015, 03:34 PM -
Timber for outdoor potting table
By paddyjoy in forum WOODWORK - GENERALReplies: 3Last Post: 8th January 2013, 07:30 PM -
Mum's Potting Shed
By Scribbly Gum in forum THE SHEDReplies: 6Last Post: 17th April 2011, 07:13 PM -
Found wood - paperbark
By Sawdust Maker in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 5th March 2011, 05:57 PM -
Potting Bench
By HappyHammer in forum WOODWORK - GENERALReplies: 8Last Post: 6th January 2006, 11:26 AM