Needs Pictures: 0
Results 1 to 9 of 9
Thread: Wooden knife - aka letter opener
-
18th October 2017, 07:58 AM #1
Wooden knife - aka letter opener
Its been a while since I losted any actual work so here it is. Started earlier in the week was a letter opener that went wrong. It snapped at the handle.
The timber was bulloke. I wanted a contrasting handle laminate on each side. To make this more difficult I wanted the blade to flare out to full thinckness of handle and then recess the laminates immediately behind this.
Rather than have a single thickness blade blank that runs into the handle this meant thicker stock and reduce each side. If course I selected what some call the hardest timber in the world. Without any further adieu this version 2.0
You can see the Tasmanian Celery Top Pine laminated on one side for contrast.
I used an oberhead router amd mobed the work beneath thw blade to reduce the stock
Getting ready for side 2
DaveTTC
The Turning Cowboy
Turning Wood Into Art
-
18th October 2017 07:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th October 2017, 11:37 AM #2GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
That is a very dangerous looking paper knife Dave! The overhead router looks a bit terrifying too I hope that you keep hands etc. well clear of that. I look forward to seeing the final product.
David
-
18th October 2017, 12:23 PM #3
Yes I used a push stick at the business end
DaveTTC
The Turning Cowboy
Turning Wood Into Art
-
18th October 2017, 12:53 PM #4
How was the letter opener held down for over head routing??
Cheers Matt
Sent from my iPhone using Tapatalk
-
18th October 2017, 02:45 PM #5
Hand and push stick. Moved the work under the cutter.
Normally I would habe wanted to clamp the work and move the router.
DaveTTC
The Turning Cowboy
Turning Wood Into Art
-
18th October 2017, 04:03 PM #6
Once glued it was matter of cut shape and sand
Another angle
And as I wantes the stock to blend into the laminates you can see the widening here
All that's left is a bit of oil to bring it to like.
DaveTTC
The Turning Cowboy
Turning Wood Into Art
-
18th October 2017, 06:16 PM #7
-
18th October 2017, 06:31 PM #8
I remember Ray & You using that fancy machine with a circular saw on it.... Awesome bit of kit, but way too big for most sheds.. Cheers, Peter
-
19th October 2017, 08:47 AM #9
Well no change just some oil, blade close up
Overview
And handle detail
The knife is in the mail and should be recieved tomorrow.
DaveTTC
The Turning Cowboy
Turning Wood Into Art
Similar Threads
-
Pen, Letter Opener and Cufflinks
By toddbron in forum WOODTURNING - PEN TURNINGReplies: 3Last Post: 15th April 2013, 08:32 PM -
Pen & Letter Opener
By Perfect Pens in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 29th November 2011, 11:21 PM -
Commemoration pen and letter opener
By Dalboy in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 14th July 2009, 04:15 AM -
letter opener question
By ElizaLeahy in forum WOODTURNING - PEN TURNINGReplies: 2Last Post: 26th June 2009, 11:11 AM -
segmented? letter opener
By ss_11000 in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 4th May 2006, 01:59 PM