Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 37
-
23rd August 2016, 11:44 AM #16GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Barry, as I said in the linked thread all you can do is try it and if you feel adventurous try other ideas as well and 3mm MDF is a cheap way to prototype designs if you want to try different ideas. I wouldn't think the sloping curved top is necessary but then I haven't got a clue and it may work better than a flat top. if it were me I would build the thing in 3mm MDF if only for the patterns.
CHRIS
-
23rd August 2016 11:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd August 2016, 01:37 PM #17
Trying to stay away from MDF as much as possible.
The link in my original post is from an engineer who has some pretty bright ideas.
And discusses keeping the measurements tight for air movement.
As pulling air comes from all directions.
We can't control it as well as pushing air.
The 1mm is quite flexible.
You can just roll it up and tie a string around it for transport.
You can cut it with a knife.
So don't pay $5 a cut.
The guy that served me was throwing it around like he wasn't concerned at all.
He told me at 1mm thickness he could only cut within 1-2mm accuracy.
I watched them cut some 1mm.
They were shoving it thru the blade like they were on speed and it was an inconvenience.
So they weren't concerned with accuracy at all.
Anyway hope my experience gives others a heads up on what to expect and how to handle the medium.
If I were to use another medium it would be in white as the dark brown sucks all the light from my vision.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
24th August 2016, 08:39 PM #18
Heads up handling this brittle medium.
Even though I was carful handling it.
A number of cracks were discovered.
And I actually tripped over another cause I couldn't see it and broke it.
Not worth the price or the hassle.
Got a really nice looking 3mm ply today made from kauri? Maybe not.
~$18 for the full 1200x 2400 sheet at masters.
Looks beautiful
And was much lighter in colour than the masonite.
For some reason Masters panel cutter is facing the wrong way.
I was very clear about how I wanted the panel cut.
But they got it wrong.
I actually said cut it long ways not short ways.
I even motioned to the guy standing right next to him watching to make sure he was cutting it horizontally long ways.
And I just got the affirmative nod of course.
Then he acted like he was mad cause he got it wrong.
I need a proximity reminder on my phone to know that I'm at masters and ask for only this guy or that guy.
Sam or Rog only. Consistently excellent service. Its the only reason I return.
If the cutter was facing the other way so I could see I would have told him he was cutting the wrong way.
Oh and now I remember I asked for a pen but strangely they didn't have one.
I pulled two from my car one to use and one to leave for them.
But it was so freaking cold at 5° neither would work.
It just wan't meant to work out well.
Oh, and picked up some huge offcuts of really nice 18mm structural ply.
about 4 full sheets worth for $20.
At least that part worked out.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
24th August 2016, 08:50 PM #19GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
Did you get 1mm perspex (acrylic) or 1mm polycarb? I have used 1mm polycarb for some temporary staircase barrier thing so the owners could get there occupancy permits because they spaced the balusters too far apart. It comes in a roll of umpteen meters and I just kept it in the roll and rolled in over the sawblade on the panel saw to cut it to width. I couldn't crack that stuff if I tried. If I got a chisel and jammed it into the edge, I could tear the sheet a little with a great deal of effort.
-
25th August 2016, 05:10 PM #20
perspex
will have look at polycarb for the next project.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
11th September 2016, 10:42 AM #21
Please help find a way to unravel the curved back to cut • sketchUcation • 1
[Plugin] Flattery papercraft tools • sketchUcation • 1
Flattery Papercraft Tools
https://www.youtube.com/watch?v=9MHfAaqb5A0
https://www.youtube.com/watch?v=gcnyFolpVBg
Completely and utterly humbled by Sketchup contributions and contributors.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
5th September 2017, 05:38 PM #22
OK. A year later and I'm having a quick go at it again.
Still waiting for my melamine to be cut and delivered. Grrrr
IMG_1234.jpg Untitled.png Untitled.jpg
Used Flattery.rbz in sketchup to unravel the curve.
IMG_1273.jpg
Way too freakin cold to work in the shop this avo.
Plotted the layout on kitchen table.
I'm hoping 24 segments per circle. (12 per half circle) is enough for practical use.
IMG_1278.jpg
Next prototype:
IMG_1242.jpg
Hopefully will cut the perspex first thing tomorrow.
And see if I have gotten even close to the correct shape.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
6th September 2017, 12:25 PM #23
Darn! Stuck again!
the 3mm perspecs was so damaged it was dangerous to work with.
But the concept was close.
Came back inside to see if I could plot a bit closer.
With the top and bottom trenches are already cut and working horizontal.
I wanted to just tilt the back of the top down to reduce the space.
In sketchup I found that the trench is a maximum 33mm off with the back of the top tilted down.
Is there some spacial genius that can help with this?
thanks in advance
Untitled.jpegThanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
6th September 2017, 02:15 PM #24
-
6th September 2017, 02:36 PM #25GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
Barry. I did this thing for a client back in 2007, 10 years ago. It may have been 1mm, maybe 1.5, maybe even 2mm. I can only guarantee that it was 'temporary' for the sole purpose of gaining a permit and it was thinner than the materials I was using on a day to day basis being 3mm and 4.5mm acrylic for shop front signage. I would expect the 1mm poly to achieve its purpose unless you are constantly flinging offcuts back at the housing behind the saw (I do it at work all the time because I am all rush rush). And even then you would need to fling the offcuts back at the same exact point to work harden that area of the sheet to make it brittle enough to be penetrated. If in doubt and money isn't a concern, buy thicker but don't go overboard because you still need to bend it, without the aid of heat.
I am assuming that the polycarb is simply seating into a groove top and bottom and is not being asked to perform structural duties.
-
6th September 2017, 02:43 PM #26
Thanks for the quick reply Kuffy.
Much appreciated.
I was hoping I could get away with the 1mm at ~$60.
It's got to roll up and fit in the back of the car as well.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
6th September 2017, 03:08 PM #27.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,756
!mm should be OK especially if you are going to curve it.
I use 1 mm on saw guards and it works fine and it won't shatter like acrylic.
It makes a good transparent protective surface for wooden tables.
-
7th September 2017, 06:19 AM #28
Untitled.jpegUntitled2.jpegUntitled3.jpg
Started again.
Segmented the half circle trench.
Copied it. Placed it at 370 to account for the trench depths.
flipped it. Angled it.
Drew connecting lines.
To make the segments I created rectangle as close to the connection points as possible.
Moved the rectangle corners to exactly where I needed them.
Made just enough to for half (of the half circle tranch. Then copied and used scale to make a mirror.
Copied both halves over to a new project.
Used the rotate tool to unfold the first group of segments. Then again for less segments. Then again for less segments.
Still 32mm out on a couple of segments but don't know how to rotate them without loosing my linear spacials.
I'm hoping this is close enough.
Untitled4.jpegThanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
7th September 2017, 02:59 PM #29New Member
- Join Date
- Jun 2012
- Location
- Mornington Peninsula, Vic
- Posts
- 5
-
8th September 2017, 03:04 AM #30
All good.
Any positive response and/or suggestion is greatly appreciated.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
Similar Threads
-
Jet Dust hood
By wheelinround in forum WOODTURNING - GENERALReplies: 5Last Post: 1st May 2012, 12:34 AM -
Dewalt DW733 Dust Hood
By adeben in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 29th August 2010, 11:26 AM -
Dust Collector Hood
By Keoni in forum WOODTURNING - GENERALReplies: 12Last Post: 2nd February 2009, 01:17 PM -
Help wanted with dust hood for new thicknesser
By derekcohen in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 4th June 2006, 01:19 AM -
Dewalt 733 Dust hood
By Poloris in forum HAND TOOLS - POWEREDReplies: 0Last Post: 26th August 2005, 12:15 AM