Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: BA Falcon Radiator Change
-
15th December 2016, 10:58 AM #121 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,401
BA Falcon Radiator Change
Hei guys,
As you can see from the pic I need to change the radiator on my 6 cylinder BA.
From reading the manual I know there is aircon and oil hoses involved which is what worries me.
Is it a simple job, does the aircon and oil stuff need bleeding or gasing when done or is it straight in straight out.
I know if I have doubts I should call a mechanic, but my finances are very limited, I'm also in a small town where we have one radiator joint and a ford dealer.
The radiator place can do it end of next week, but he says he uses a coolant concentrate which he puts in and dilutes with water, I want proper coolant which means supplying my own.
The ford dealer can't do it until new year.
I have basic mechanical skills, I've done the front wheel bearings myself, and I do my own servicing. Aside from the oil and aircon stuff I think this is within my capabilities – but I am after some advice so if I do attempt it myself I have both eyes open.
Any advice would be much appreciated
Thanks
Paul
-
15th December 2016 10:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th December 2016, 04:17 PM #2
Personally, I would try a bottle of radiator/ head gasket stop leak gunk first up. I ended up with a heater core leak in Pug 306 about 6 years ago. Ordered a heater core from England intending to replace it, but put a bottle of the head stop leak gunk (Can't remember the brand but it was green colour with metal flakes in it, abt $25) and it was completely sealed within 15km on the way to work next morning and still is now. No sign of overheating suggesting other channels got blocked, heater works fine so it didn't just plug the heater up and isolate it.
A/C needs to be degassed leak tested and regassed if you have to disturb the lines and pull the rad and condensor together, but they are two seperate elements and should be able to be removed independently. Transmission oil lines shouldn't be an issue, you can disconnect if you need to, but you will loose the fluid contained in the heat exchanger in the rad, plus a small amount of dribble from the lines. The transmission sump is generally well below the cooler lines at the rad , oil is pumped through the cooler when the engine is running. However you need to be prepared to catch spillage and to top up transmission when finished.
As I said, I would try a gunk fix first unless you know the rad is already way below par on cooling efficiency.I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
15th December 2016, 04:59 PM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Don.t !!!!! put that stop leak stuff within 10m of your radiator or your engine, you should be able to remove radiator with out disconnecting the air con condenser it is fiddly but can be done,so long as trans is not a six speed it would be just a top up when reassembled, if disconnected the air con condenser has to be done by a licensed operator no exceptions I don't know what you mean by "real coolant" all coolant is a concentrate diluted with water
-
15th December 2016, 05:53 PM #421 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,401
I thought about that, but the pressure and volume of the leak makes me think it would be a waste of time.
Plus when I work, I am on call at short notice. I won't risk $400 a day and a reputation of being unreliable because of the car.
I'll fix this properly
-
17th December 2016, 07:52 AM #5Senior Member
- Join Date
- Dec 2011
- Location
- Deception Bay Qld
- Posts
- 213
At 10yrs+ old BA would be due for a radiator at least if a new one is fitted you wont have to worry about the dreaded milkshake in the tranny , replace the waterpump, thermostat and hoses if they are the same age as preventative maintenance. Jump on the Ford Forum and asked those guys if the would recommend a aftermarket brand there might be a cheaper radiator with the same quality as genuine.
-
17th December 2016, 10:20 AM #621 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,401
I get what you're saying Whitey but this is going to be radiator only.
As much as I would love to replace everything else I just don't have the funds right now - I live in a small town, my longest trip is only 15k's so I can take a chance.
-
17th December 2016, 04:20 PM #7
-
21st December 2016, 05:50 AM #8SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 909
I don't get the aversion to using concentrate - anything else you use is going to consist of a large % of water...why pay to have it transported from a factory somewhere?
I'd go the radiator place myself, likely to be quicker and cheaper. The coast is a big place, so can't advise any further...plus it has been some time since I've lived there. No idea who's doing what anymore.Semtex fixes all
-
21st December 2016, 05:54 AM #9SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 909
Oh, one last thought...
That hole looks a bit too serious for anything like bars leaks or anything like that. But perhaps if you can clean around it and wire brush any loose paint away some plastibond, kneadit, or something similar might *patch* it enough to keep you going while you wait.
And I realise by the dates you may have already dealt with this...Semtex fixes all
-
21st December 2016, 10:09 AM #1021 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,401
Got it fixed guys, $520 at the local radiator place.
He only charged about $160 for labour and with no car it would have cost me $40 in cab fare to go get the new radiator and coolant so worth the money.
Thanks for the advice guys, have a great christmas - may the fat old fart in red bring you what you desire.
Similar Threads
-
aluminium oil radiator repair
By Mathuranatha in forum WELDINGReplies: 3Last Post: 9th May 2012, 09:10 AM -
help with cooling system/radiator
By macklin in forum MOTOR VEHICLESReplies: 6Last Post: 2nd July 2007, 06:15 PM -
LPG - Falcon
By Daddles in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 30th January 2006, 12:31 PM -
Yorkshire Radiator Covers
By trooperbill in forum Links to: WEB SITESReplies: 8Last Post: 16th November 2004, 08:59 AM