Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2007
    Location
    USA
    Posts
    474

    Default Changing spark plugs, Chevy Blazer

    I've finally gotten around to changing the park plugs on my Chevy blazer, vintage 2000. Or trying to, 5 done, 1 to go. It's the one though that begs the question, are all automotive engineers on crack?

    They are platinum spark plugs, supposedly good for 100,000 miles, I thought seven years and 90,000 was close enough. I've always known they were hard to change, thats why they use such high mileage spark plugs I suppose. But dang, close quarters is one thing, removing components just to change the spark plugs is another. It appears one has to remove the steering shaft to get to the fifth spark plug. I've tried a ratchet, a breaker bar, a gear wrench with socket adapter, I've tried putting the spark plug socket on as far on as it will go and then trying to get the ratchet/breaker bar/gear wrench on, nada, nope, not going to happen, just not quite enough room. I figured if I could even just get it on there and break it loose I could back it out with my fingers but its too tight to even get anything on it to break it loose with.

    .5" up or down or .25" further away and this problem could have been averted, but no, couldn't do that.

    Why? Why? Why?

    Why do they mix metric and standard fittings? Thats another good question.

    Why do engineers have such issues?
    Wood. Such a wonderful substance.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2004
    Location
    Hell with fluro lighting
    Age
    55
    Posts
    2,156

    Default

    Tube spanner and screwdriver??
    I may not have gone where I intended to go, but I think I have ended up where I needed to be.

    My Other Toys

  4. #3
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    4,650

    Default

    Cars and their components are designed for assembly, not for repair. The engine is complete before it's placed in the chassis. The "logical" conclusion therefore is that to change the spark plugs, you must remove the engine. Repair procedures are generally developed after the design for production is complete, and a few prototypes have been built. As the engine rooms have become more crowded, this process can get quite involved.

    Haynes repair manuals generally have a subtitle "Based on a complete teardown and rebuild." The catch is that for some repairs, a complete teardown is the only means of access.

    I'm not familiar with the 2000 Blazer, but a good first guess would be to disengage the engine mounts and jack up the engine a few inches to move the spark plugs to a more accessible location. This is not plowing new ground; the same procedure was needed on the 1955 Buick IIRC.

    I had a worse experience replacing the fan motor on a 1968 Olds Cutlass (around 1970, $35 for the new motor). The motor was underneath the AC condenser on the firewall. To replace the motor, I removed the hood [(bonnet)], right front fender, inner fender, and front grill (I think I had to remove the grill to remove the fender). Much later, I learned of a "standard" procedure which entailed cutting an access hole in the inner fender; the procedure even included a template for cutting the hole and making a patch.

    Joe
    Last edited by joe greiner; 22nd August 2007 at 12:26 AM. Reason: [terminology]
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  5. #4
    Join Date
    Aug 2002
    Location
    Boyne Island, Queensland
    Age
    51
    Posts
    929

    Default

    Quote Originally Posted by Matt88s View Post
    Why do they mix metric and standard fittings? Thats another good question.
    It's not half as bad as when they mix standard and Imperial.
    Dan

  6. #5
    Join Date
    Dec 2004
    Location
    Hell with fluro lighting
    Age
    55
    Posts
    2,156

    Default

    Quote Originally Posted by Dan View Post
    It's not half as bad as when they mix standard and Imperial.
    Whenever I work on the Graham, I have this problem, when dad put it together originally he used what ever fell to hand at the time, so it has a mixture of AF, Metric and Whitworth.

    Infact last time I pulled the radiator out, one side was metric and the other AF
    its fixed now..
    I may not have gone where I intended to go, but I think I have ended up where I needed to be.

    My Other Toys

  7. #6
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    There are worse cars than your chevvy

    I remember a rear engined v8 Lamborghini years ago,
    Had to remove the engine to replace the starter motor.

    Working on cars sucks bigtime
    Glad I'm a woodie these days
    Regards, Bob Thomas

    www.wombatsawmill.com

  8. #7
    Join Date
    Oct 2003
    Location
    Sydney,Australia
    Posts
    3,157

    Default

    Older Jaguars - ONLY way to replace the sparkplugs is to remove the engine completely - the plugs are put in at an angle from underneath & there is NO room to back them out.

    I once saw a Jag being driven along & it took me a while to realise what was different - the bonnet was removed & the engine bay contents took up ALL available room & even replicated the profile of the bonnet.

  9. #8
    Join Date
    Mar 2007
    Location
    USA
    Posts
    474

    Default

    Quote Originally Posted by bsrlee View Post
    Older Jaguars - ONLY way to replace the sparkplugs is to remove the engine completely - the plugs are put in at an angle from underneath & there is NO room to back them out.

    I once saw a Jag being driven along & it took me a while to realise what was different - the bonnet was removed & the engine bay contents took up ALL available room & even replicated the profile of the bonnet.
    If I recall right on the older jags you also had to drop the rear axle to change the brake pads.

    I'm pretty lucky with only a sparkplug to deal with I suppose.

    I understand cars put together for assembly, but all cars have to be repaired and more attention IMO, should be paid to ease of repair. Spark plugs are one of the most basic upkeep, along with oil filters, air filters, wires, etc. You would think they would design them accordingly.

    I know several of the older cars use to require engine removal to replace the spark plugs and whatnot, and I'm aware of this, but it is still poor engineering IMO.
    Wood. Such a wonderful substance.

  10. #9
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    Hope I dont get shot for this but go to www. arboristsite.com Its a USA site and a section somewhere on you yankee guys and their trucks cars etc maybe more help than us mainlanders.
    I would love to grow my own food, but I can not find bacon seeds

  11. #10
    Join Date
    Dec 2004
    Location
    Hell with fluro lighting
    Age
    55
    Posts
    2,156

    Default

    Quote Originally Posted by bsrlee View Post
    Older Jaguars - ONLY way to replace the sparkplugs is to remove the engine completely - the plugs are put in at an angle from underneath & there is NO room to back them out.
    That would be the V12, that sucker takes up an enormous amount of room./

    Quote Originally Posted by Matt88s View Post
    If I recall right on the older jags you also had to drop the rear axle to change the brake pads.
    Yes the XJ6 had inboard rear disks. the difference is that the removal is easy as the whole rear end is in a sort of cage.

    I do know of a couple of Italian cars where you adjusted the distributor timing through a hole in the dash
    I may not have gone where I intended to go, but I think I have ended up where I needed to be.

    My Other Toys

  12. #11
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    6,908

    Default

    There's a legend in my town of a bloke with a XB ute tote'n a 460BB between the towers, to change the rear passenger side plug he had an access plate through/behind the glove box!(had a recessed firewall)
    ....................................................................

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •