Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Cleaning up Autoplay
-
13th July 2018, 12:08 PM #1
Cleaning up Autoplay
I have multiple instances of my cameras in Autoplay and I would like to delete them. From what I have discovered it looks like I have to modify/edit my registry.
Is this the only way?
O/S is Win 7.
Devices.jpgTo grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
13th July 2018 12:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th July 2018, 11:28 PM #2
You have 3 listings for one camera model and 2 for a different model. This has most likely arisen because the camera's have been connected to different logical USB ports at different times. I am not sure how to trim the instances down to one for each camera, but I suggest that you check Control Panel Device Manager, and you might find multiple instances of the cameras and be able to disable or delete some. However, if that works, and you then connect a camera to a logical USB port for which you have disabled the connection, the computer may not recognise the camera and run autoplay for it. On the other hand if you delete the connections, and then try to reuse them by connecting the camera, the system will reinstall the drivers etc for the connection anyway, the same as it would if it was a new unknown device on the connection, which can cause frustrating delays while it tries to locate drivers etc. and configure them.
Since these multiple instances don't impose a significant burden on the system when the camera are not not connected, I would be tempted to leave the multiple instances set to 'Always ask'. That way you get some choice of action whenever you connect, but fairly minimal delays and system burdens otherwise.I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
15th July 2018, 05:09 PM #3
I have managed to remove all the Canon devices by editing my registry, plus I removed the Gigabeat that I no longer have.
To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
Similar Threads
-
Cleaning
By bwal74 in forum METALWORK FORUMReplies: 15Last Post: 3rd March 2012, 07:29 PM -
cleaning out pc.
By toby.1944@hotma in forum COMPUTERSReplies: 5Last Post: 28th June 2009, 12:04 PM -
Cleaning up a No5
By BozInOz in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 15th July 2008, 11:54 PM -
Cleaning
By tontoo in forum WOODWORK - GENERALReplies: 4Last Post: 27th December 2004, 06:41 PM