After we found out the Tormek honing leather wheel LA-220 actual diameter is 215mm, we started a discussion on the Tormek forum, with some interesting responses from Tormek.

https://www.tormek.com/forum/index.php?topic=3361.0

Not sure if this is news to the Tormek community, but actual honing wheel LA-220 diameter is 215 mm.
If you set your honing angle at the 220 mark that is in bold on the AngleMaster, you will inevitably round the edge.
Correct is setting it at 215 mark - as shown by the red line on the photo: