Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
20th August 2007, 08:40 PM #1Senior Member
- Join Date
- Jan 2006
- Location
- sydney
- Posts
- 345
Anyone Know of a cut off saw with 135mm docking capacity
My work is looking for a radial arm saw or even an SCMS that will cut our 135mm pine posts - anyone know of such a machine?
It seems 120 - 125mm the biggest going.
-
20th August 2007 08:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th August 2007, 09:30 PM #2
-
20th August 2007, 10:26 PM #3
The Bosch 3912 (GCM12)
might fill the bill
With the Bosch 3912 (GCM12) saw, your depth cutting capacity is 150mm. At 90 degrees you can cut 200mm width stock and at 45 degrees, you can cut close to a 140mm width piece of material.
There is a review here:
http://www.onlinetoolreviews.com/reviews/boschgcm12.htm
Regards
SG
.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
30th August 2007, 01:32 PM #4
Assuming the posts are round then you are really looking at docking saws like the leda one indicated above or this one by omga. I guess not a cheap option.<o =""></o>
-
30th August 2007, 11:29 PM #5
Hitachi make (made?) a drop saw with a 14" blade.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
Similar Threads
-
Depth of Cut for "Loose" Sliding Dovetails?
By cyface in forum INCRA JIGSReplies: 2Last Post: 3rd May 2007, 02:01 AM -
Most difficult cuts
By Tiger in forum WOODTURNING - GENERALReplies: 13Last Post: 2nd April 2007, 02:25 AM -
Chainsaw ripping blade... but not a rip cut?
By Dean in forum WOODWORK - GENERALReplies: 30Last Post: 23rd February 2007, 12:37 PM -
Cross cut on T2000
By Daddles in forum TRITON / GMCReplies: 21Last Post: 22nd November 2003, 12:38 AM -
Need jig for Triton - 22.5 degree cut
By barrysumpter in forum TRITON / GMCReplies: 4Last Post: 5th October 2001, 03:11 PM