Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: GMC mitre saw request
-
19th June 2010, 10:23 PM #1Member
- Join Date
- Jul 2008
- Location
- Sydney Australia
- Posts
- 81
GMC mitre saw request
Hi all,
i have a request please that might be a long shot, but just in case someone has a wrecked GMC compound mitre saw that's only good for parts, i'm looking for a motor armature (rotor) for a Model: MS212 1400Watt 210mm to repair mine.
It has stripped the gear that is integral with the motor shaft end, so replacing the whole armature seems to me the easiest way to repair it.
Willing to pay a reasonable ammount for the part, or a complete dead saw if anyone can help - just to make it a usable tool again.
Thanks,
greg_n
-
19th June 2010 10:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th June 2010, 07:57 AM #2Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 475
I might have one in the shed. I'll check out the model# this morning and get back to you.
-
20th June 2010, 09:52 AM #3
I got a LS210 if that's any help.
-
20th June 2010, 12:19 PM #4Member
- Join Date
- Jul 2008
- Location
- Sydney Australia
- Posts
- 81
Thanks metester,
i'd appreciate it
Thanks FX, i'm not sure about the LS210 - a few other later model saws than mine i've seen have different motors but i can't find much info on the LS210 - i think they're pretty specific but i'll let you know if i can confirm.
Cheers,
greg_n
-
20th June 2010, 01:27 PM #5Senior Member
- Join Date
- Jan 2005
- Location
- Snowtown South Australia
- Age
- 78
- Posts
- 321
Theres one on ebay for $10....not working...parts only..............AL
If your not confused you dont know whats going on!
-
20th June 2010, 05:38 PM #6Member
- Join Date
- Jul 2008
- Location
- Sydney Australia
- Posts
- 81
Thankyou AL,
but again different model - looks like a different motor
Also if i have to go a complete saw i think it will have to be around Sydney or post would be more than saw is worth !
Regards,
greg_n
-
20th June 2010, 06:30 PM #7Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 475
Hi. It seems it is not the one. It has SMS210LS 1500W on the name plate. However, if you still want it and can organise a courier to pickup it is all yours. I will be happy to move it on. It works fine mechanically however, I have stopped using it as the safety guard keeps catching and long story short.....I had enough of fixing it!! I have found Smartsend to be quite good as a courier.
Cheers
-
20th June 2010, 08:41 PM #8Member
- Join Date
- Aug 2009
- Location
- Lara, Vic, Oz
- Posts
- 58
You could try GPT, Ghebrial Power Tools 1860 Hume Hwy, Campbellfield VIC 3061<NOBR>(03) 9357 6168. </NOBR>
<NOBR></NOBR>
<NOBR>No association etc, but they were able to supply me with an original gasket for my GMC framing nailer within a couple of days for a good price.</NOBR>
<NOBR></NOBR>
<NOBR>I was told that they bought all the spares from GMC when they went under, and they have stacks of used GMC tools (some just for parts) on their shelves.</NOBR>
<NOBR></NOBR>
<NOBR>Cheers</NOBR>
<NOBR></NOBR>
<NOBR>Si</NOBR>
-
21st June 2010, 06:04 PM #9Member
- Join Date
- Jul 2008
- Location
- Sydney Australia
- Posts
- 81
Thankyou guys for all the offers and advice, as i said it was a long shot
Without seeing the motor removed from the saw it's impossible to tell which other models might fit but if i work anything out i'll re-post.
Cheers,
greg_n
Similar Threads
-
By Request :)
By gawdelpus in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 12th October 2008, 08:38 PM -
Odd request.
By charlieart66 in forum WOODWORK - GENERALReplies: 25Last Post: 4th July 2008, 01:19 AM -
Per a request
By Ron Mc in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 1st December 2006, 09:17 AM -
request for a half lap mitre jig
By rob_tassie in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 10th October 2003, 04:26 PM