Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
29th April 2018, 07:55 PM #1Senior Member
- Join Date
- Dec 2011
- Location
- Sydney
- Posts
- 178
"Hand" of a portable circular saw
I bought a Metabo corded circular saw some decades age, mainly because it had a riving knife which was not so common as now. However I have always disliked using it because when holding it (in my right hand) the handgrip is between my body and the blade, which feels wrong. My 85mm Makita cordless saw is the same, but being tiny is more comfortable to use.
Perusing Bunnings tool dept today there seem to be saws of both "hand" configurations in approx equal numbers.
Did I accidentally buy a left handed saw in 1985, is it just personal preference or is there some other issue that I have missed? Keen to know as a salty woodworking project is reeling me in, and if so a new saw will be on the shopping list.
Cheers,
Bill
-
29th April 2018 07:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2018, 08:02 PM #2SENIOR MEMBER
- Join Date
- Apr 2016
- Location
- Mooroopna, Victoria, Australia
- Age
- 34
- Posts
- 228
My understanding has always been that the blade is supposed to be on the opposite side of the saw to the operator for safety.
As much as it's difficult to see what's happening, I'd rather be on the safe side.
-
29th April 2018, 09:51 PM #3Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Blade needs to be on the operator side to follow a guide rail comfortably, otherwise you're trying to cross over or hold with the wrong hand. It seems to be that most corded saws are blade on the right of the motor and cordless on the other side, no idea why though...
-
30th April 2018, 01:53 PM #4
I never knew there were lefthander saws but have never had a cordless one either.
Regards
John
-
30th April 2018, 02:12 PM #5
American corded circular saws have the motor usually on the right. It was to do with the motor having a worm drive to get some grunt out of the saw running on 110 Volts. Years ago there was a program on gardening. There was a bloke to demonstrate getting reject timber and other stuff to make wooden stuff for gardens etc. Raised beds, square wooden pots, that type of thing. I could not watch while he used a power saw to cut his material. I couldn't figure out, for a while, why he urcked me so much till I realised he was using his left hand to run the saw which put his right hand where it could get cut.
Just do it!
Kind regards Rod
-
9th May 2018, 06:08 PM #6
I can't really see it being a safety issue as to which side of the grip the blade is on. Not unless you're also considering what sort of usage that saw will be put to.
When ripping timbers/sheets down to size - either using a straight edge or eyeballing to a line - I much prefer to have the blade on the LH side. I can see the blade cut w/out obstruction by guards or the saw body and know that everything is hunkydory.
When lopping the top off an already standing fence post (or trimming a fence or...) I prefer the blade on the RH side as being right-handed I feel safer cutting from right to left AND as I'm carrying the weight of the saw in the cut (it would be nice to lay the fence flat on the ground, but... ) I want the body of the saw to the bottom so that in an inadvertent moment should I wearily let the saw drop a bit between cuts, it'll the inert body that may contact whatever's underneath it, not the snarly, whiny, bitey bit.
After all, it may be me that's underneath...
- Andy Mc
-
10th May 2018, 01:56 AM #7SENIOR MEMBER
- Join Date
- Dec 2011
- Location
- SC, USA
- Posts
- 611
Coriolis effect.
Our saws work fine in the Northern Hemisphere.
Similar Threads
-
Entry level hand tools - are "brands" worth the $20-$30 extra?
By MichaelQ in forum HAND TOOLS - POWEREDReplies: 15Last Post: 22nd January 2018, 12:09 PM -
New Festool Circular (not plunge) saw with dedicated "reloading" guide rail
By FenceFurniture in forum FESTOOL FORUMReplies: 19Last Post: 23rd May 2015, 12:41 AM -
Which Circular Saw has a decent "Stiff" base
By alex_m_84 in forum HAND TOOLS - POWEREDReplies: 11Last Post: 8th November 2014, 02:15 PM -
Ideas for "beginner" project with only hand tools!
By mpatman in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 27th February 2009, 08:33 PM