Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 23
-
20th December 2008, 10:57 AM #1New Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 6
Intersting story about a 110v tools imported from states.
I was chatting to a guy at work the other day about his Makita LXT impact driver and drill setup. He explained to me he bought it from the states and got it for a bargain, my eye wandered over to his charger and there didn't appear to be any type of step down transformer connected to it. I asked how he was running his 110v charger on our 240v power? He told me he was talking about his purchase at a tool shop on the gold coast and was asking them about step down converters, they said bring the charger in and a case of beer and they will trade it for an aussie charger.
Why the hell would they want to do that??
All I can think of is that maybe they know an easy way to do some re wiring and have been keeping themselves in Friday arvo beers ever since.
Anyone able to provide any other theories?????
-
20th December 2008 10:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th December 2008, 11:11 AM #2
Sounds like electrickery to me .
Maybe they had some old stock. Who knows.
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
-
20th December 2008, 11:37 AM #3
Do you know which tool shop?
-
20th December 2008, 11:39 AM #4New Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 6
Yep............I will PM it to you.
-
20th December 2008, 01:39 PM #5
Halfie,
I am in the Navy and our FFG's are mostly 110 volt (there are some 240 volt circuits onboard). If you look at the power supply on the tools you will be suprised to see how many run in the range 110-250 volt. All the techo's tools were purchased off the shelf in Australia and could run both US & Aus voltages.
CorbsIt's only a mistake if you don't learn from it.
-
20th December 2008, 03:42 PM #6New Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 6
So you reckon they just swapped chargers with him and had a good laugh about scoring the free box of beer?
-
20th December 2008, 07:00 PM #7
The thought never entered my mind
It's only a mistake if you don't learn from it.
-
20th December 2008, 08:14 PM #8
That would be my guess. Lots of electrical items are made for 110 - 250v these days, saves the manufacturer from needing to do 2 seperate build runs. They just rebadge at the end.
For heavens sake don't think that all 110v items are that way or u'll be in for a rude shock when the smoke jinni leaves its home.
-
20th December 2008, 08:23 PM #9Senior Member
- Join Date
- Jun 2005
- Location
- Planet Earth
- Posts
- 477
Sometimes there is a little switch that selects which windings are used on the transformer in the charger. It might be inside or under a sticker.
You often see it on the back of computer power supplies.
-
20th December 2008, 10:33 PM #10
I have a lot of XLT gear with 110 chargers (fast and normal 1Hr), but had a stepdown tranny that can power 4 chargers at once available before purchase.
Have looked inside both chargers and there does not appear to be 110/220 switch. Charger is switch mode so no transformer with different taps to connect mains to either. I simply run via the stepdown transformer and leave it at that. Oh, I did buy a 800W 12 to 110 V inverter so that I can charge from car battery in the field if I need to, thats good and can charge power two fast chargers, but its hard on car batteries unless the car is running.
-
21st December 2008, 06:42 PM #11New Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 6
Interesting........
Wonder why they had any interest in his 110v charger then?
I have a relo who is an appliance repair guy....I might see what he reckons over Christmas dinner.
-
22nd December 2008, 09:12 AM #12
A long, long time ago when I was an electronics assembly tech, I used to assemble machines that had switch mode power supplies in them (smaller than most chargers) that would operate off anywhere from 80V to 260V (or there abouts), without needing to change anything ... just plug it in.
This gear was used in Oz as well as exported to the US and Europe.
Could be these chargers have a similar setup.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
22nd December 2008, 09:57 AM #13
You can't buy a laptop that wont work on any ac voltage any where in the world - just plug it in and go. I suspect that some of the cordless tools have used that sort of transformer for years. I heard rumours of it when I was thinking of bringing my stuff over 4 years ago but back off because I couldn't get absolute confirmation. I suspect the manufacturers aren't gonna say anything either as there would be a made rush to buy in the states and ignore the local suppliers. And it would make sense in that it's cheaper to have one charger for everything instead of a few.
I might actually put it to the test and get a relative to send over a charger and ill plug it in and see what happens.
-
25th December 2008, 05:55 PM #14Member
- Join Date
- Feb 2007
- Location
- Yackandandah
- Posts
- 50
Everyone prob realizes it but you can also buy an 18 v Dewalt charger which plugs into the cigarette lighter it does flatten car batteries fairly quickly
-
27th December 2008, 12:15 AM #15SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 909
We've got a panasonic video camera (very old) that was bought in Paraguay. In the instruction booklet it says you can plug it into either 110 or 240. The circuitry works out what to do Quick plug change and it was Aussified
Semtex fixes all
Similar Threads
-
intersting item on ebay
By Gaza in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 23rd November 2008, 10:08 PM -
Claiming Imported Tools on Tax??
By blute in forum HAND TOOLS - POWEREDReplies: 6Last Post: 17th April 2008, 10:47 PM -
Purchasing 110v tools from USA?
By johncee1945 in forum HAND TOOLS - POWEREDReplies: 10Last Post: 25th November 2007, 09:42 PM -
Using 110V/60 Hz tools in Oz
By FlyingDuck in forum HAND TOOLS - POWEREDReplies: 14Last Post: 21st September 2005, 05:23 PM -
Price of imported tools and machinery
By ndru in forum HAND TOOLS - POWEREDReplies: 8Last Post: 14th May 2003, 08:39 PM