Page 1 of 2 12 LastLast
Results 1 to 15 of 27

Thread: Jigsaw blades

  1. #1
    Join Date
    Aug 2017
    Location
    Moggs creek
    Age
    59
    Posts
    47

    Default Jigsaw blades

    I have a Makita Jigsaw and using Bosch blades cutting hardwood about 30 to 50mm thick and the blades are blunting it seems very quickly.
    Is the wood to thick or do I need better blades ?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    Are the blades designed for hardwood? When you say "quickly", after roughly how many metres do they go blunt?

    Bosch blades are excellent quality, and are usually Swiss made.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  4. #3
    Join Date
    Aug 2017
    Location
    Moggs creek
    Age
    59
    Posts
    47

    Default

    The packet number is T144D Fast cut speed for wood and says 5 to 50 mm. I have cut out around 20 small spoons and its hardly cutting now. Ive been cutting Blackwood, mountain ash, teak, wattle.

  5. #4
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    Without researching that particular blade, it may be a blade more designed for straight cuts rather than curves (which you would surely have with spoons). This is usually determined by the distance between the teeth points and the back of the blade. A larger distance has more friction going through a curve. I'll see what I can learn from my own set of Bosch blades, and report back.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  6. #5
    Join Date
    Aug 2017
    Location
    Moggs creek
    Age
    59
    Posts
    47

    Default

    Was also using the scrolling type of blade Bosch T101AOF which says clean cut for hardwood but only to 15mm. Does the curves better but very slow.

  7. #6
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    Ok, they are indeed for straight line cutting. Have a look at the middle icon under the word "speed" on the packet and you can see the blade cutting straight lines. What you need is something like a T308BOF BIM (BiMetal) "extra-clean for hardwood".

    If this link works correctly you can see the second from left icon showing the blade cutting a circle. They are a slightly longer blade, but still for 5-50mm thickness.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  8. #7
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    Quote Originally Posted by Tony ray View Post
    Does the curves better but very slow.
    Maybe, but not as slow as it is now.......
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  9. #8
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    I think you'll find the problem, is that the blades are designed for straight cut, not curved.
    On this page, which lists all the blades recommended for cutting wood; https://www.boschtools.com/us/en/bos...-wood-22547-c/
    I found this recommendation.
    T244D Speed for Wood 5-6 Progressive Teeth Per Inch 4 Hard/soft woods, OSB, plywood 1/4"- 2-3/8" Scroll blade for curved and fast cuts

    Found this on Google; https://www.boschtools.com/us/en/bos...4d100-29815-p/
    Copied from that page
    "Designed for straight and very fast cuts in wood, OSB and plywood 1/4 In. to 2-3/8 In. thick
    6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in wood
    4 In. overall length, 3 In. usable length
    100 piece pack offers maximum value"
    Hope this helps,
    Kryn
    To grow old is mandatory, growing up is optional.

  10. #9
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    Teeth point to back of blades measurements (roughly):
    344 is about 9.5mm, and I assume a 144 is the same but for shallower cuts. They have very aggressive teeth, hence why the straight line cutting icon shows splintering as well.
    T101AO is just under 5mm and much finer teeth which is why they are slow
    T308BOF just over 7mm and with one fine tooth and one coarser tooth.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  11. #10
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,644

    Default

    I'll bet if you examine the 144 teeth points that you'll find they are burnt, or at least blunt.

    Kryn, doncha just hate that when you say the same thing but it takes longer to type, because of adding links?
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  12. #11
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    You're not wrong there, it took me about 15 minutes to do that short speel, by the time I found what was looking for, copy paste etc, but it's a good way of getting the correct information. Can't have someone say that it's WRONG info then.
    Kryn
    To grow old is mandatory, growing up is optional.

  13. #12
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,803

    Default

    Quote Originally Posted by Tony ray View Post
    The packet number is T144D Fast cut speed for wood and says 5 to 50 mm. I have cut out around 20 small spoons and its hardly cutting now. Ive been cutting Blackwood, mountain ash, teak, wattle.
    Blackwood, Teak and Wattle all contain high levels of silica (welcome to Australian hardwoods!), and these will dull blades very quickly.

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  14. #13
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,063

    Default

    Tony ray

    I have to say that I find the jigsaw a tool that struggles with the harder timbers particularly as the timber gets thicker. Now while you can say this is true of almost any power tool, it seems to be particularly so of the jigsaw. There are very sophisticated (and expensive) jigsaws, which do perform better I'm reliably informed, but not the run of the mill offerings from Bosch, Makita, Metabo et al. The cheapies are probably unworthy of comment.

    Tight curves or turns require a very narrow blade and wide blades are suited to straight cutting or only the very gentle curves. A bandsaw (with a narrow blade) is a better tool for what you are doing particularly if you are doing small production runs.

    I rough cut handles from some of the harder hardwoods for handsaws using a jigsaw. It is really tough going in material only 24/23mm thick. I use a jig saw because I need to cut the handle hole and a bandsaw can't do that.

    I have just re-read your post and 30-50mm is a big ask for a jigsaw. 50mm in Pine, but 5mm in Wattle .

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  15. #14
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,954

    Default

    The makita
    Jigsaw I own has oscillating function on it.
    I've meet two other owners of same saw who had know idea it was there.
    A little lever towards the front right side.
    Which moves to three indents.
    Makes a big difference in cutting quality

    Cheers Matt

  16. #15
    Join Date
    Aug 2017
    Location
    Moggs creek
    Age
    59
    Posts
    47

    Default

    Thanks for the responses guys, lots of help.

Page 1 of 2 12 LastLast

Similar Threads

  1. Scintilla Jigsaw Blades
    By Dougorr in forum WOODWORK - GENERAL
    Replies: 7
    Last Post: 26th December 2011, 08:56 PM
  2. Jigsaw blades
    By FXST01 in forum HAND TOOLS - POWERED
    Replies: 1
    Last Post: 21st May 2008, 08:30 PM
  3. Jigsaw blades.
    By PHSUK in forum WOODWORK - GENERAL
    Replies: 8
    Last Post: 3rd May 2007, 12:29 PM
  4. Bloody jigsaw blades!
    By derekcohen in forum HAND TOOLS - POWERED
    Replies: 21
    Last Post: 31st August 2002, 11:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •