Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Jointer Blades
-
13th October 2006, 01:29 PM #1Hoarder Extraordinaire
- Join Date
- Nov 2005
- Location
- Canberra
- Age
- 67
- Posts
- 69
Jointer Blades
Hi all,
I realise that this is a very subjective question but how often do you sharpen/ replace your jointer blades? Obviously when they're blunt but how is that determined as well? I got a Carbetec CTJ-150 and it's a great machine but just recently it's much noisier and has more vibration when I'm passing timber, even pine, across the cutter head. I have not changed the blades as yet. Should I sharpen or replace and should I expect much cursing and frustration?
Cheers
Pete.
-
13th October 2006 01:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th October 2006, 01:36 PM #2
I have a Tormek so I can afford to sharpen my jointer blades and thicknesser blades as often as possible. I generally do it every 2 to 3 major projects.
Sharp blades are good for the timber and the machines.Visit my website at www.myFineWoodWork.com
-
13th October 2006, 02:32 PM #3
Sounds like they're due for a sharpen. I usually don't bother until the nicks get so big they look like raised beads :eek:
-
13th October 2006, 05:41 PM #4
You can buy a small sharpening/honing guide from carbartec and other places, which is specially designed for jointer blades ad allows you to sharpen the blades without removing them. It's good for touching them up. Costs around $35 from memory. After a while though, there's no option but to remove them and replace or sharpen.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
Similar Threads
-
What do you use as Winding Sticks?
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 17Last Post: 6th June 2006, 03:41 AM -
Putting wooden plane blades in Stanleys.
By JDarvall in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 18Last Post: 30th November 2005, 08:29 AM -
Sharpening Jointer Blades
By Ranger in forum HAND TOOLS - POWEREDReplies: 5Last Post: 24th August 2004, 09:39 PM -
Jointer blades
By ozwinner in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 4th March 2004, 04:53 AM -
setting blades in 6" jointer
By Tony Hartwell in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 16th October 2000, 09:21 PM