Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
12th September 2008, 07:49 PM #1Novice
- Join Date
- Aug 2008
- Location
- Geelong
- Posts
- 16
WARNING: 36V DeWalt Battery drill chuck problems.
My 10 week old, or so, 36Volt DeWalt Battery drill chuck just exploded in two!!!!!!! Check out the pic.
Was only screwing in a YZP batten/cyclone screw through yellow tongue flooring and into pine and 'C R A C K'.
Took it into the shop to make a claim on the warrantee and the guy says 'Oh. The chucks not covered by the warrantee'
I then says quite loudly "F^%$IN BULL%$#@ IT'S NOT COVERED BY WARRANTEE! YOU GIVE ME THE REPS F&%$IN' NUMBER RIGHT NOW!. I ONLY BOUGHT THIS A FEW WEEKS BACK! TRUST ME THIS IS GETTING FIXED FOR FREE!!!"
What would they be saying if it wasn't covered? That a $2 hex bit is stronger than the chuck or that you are actually getting the chuck for free when you spend $$$ on a drill. C'mon, give us a break.
Then another salesman couldn't help but hear and commented on the fact these drill have indeed got bad chucks and they are replacing them. Apparently 99.99% of drill chucks aren't covered by warrantee. But this is a dud, so look out. Up to 2 weeks to get fixed. D'oh.
Funny thing was I was telling an apprentice the day before I have never had to make a warrantee claim before ever!
Anyway, just warning ya's.
<!-- / message --><!-- attachments -->www.myspace.com/carpenterrific
Looks like I'm going to keep blaming my tools because:
"Poor tradesmen blame their tools. Rich tradies just go and buy new ones..."
-
12th September 2008 07:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th September 2008, 08:49 PM #2GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Looks like it was baked too long. If 'they' try to give you the run around, key phrases are 'not suitable for use', 'not of merchantable quality', 'Department of Fair Trading' along with 'Current Affair/Today Tonight' or other TV scandal rag.
DoFT will say it is the retailer's problem - repair, replace or refund AT YOUR OPTION. The retailer then has to slug it out with the distributor.
-
12th September 2008, 11:50 PM #3Intermediate Member
- Join Date
- Jun 2008
- Location
- Melbourne
- Posts
- 25
one word
"DEFAULT"
-
13th September 2008, 12:25 AM #4SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 909
Yeah, that's actually not true. As mentioned the Trade Practices Act 1974, and other States legislation provide for "fitness for intended use", "merchantable quality", and various other provisions relating to those terms. It is also an offence for them to state that they don't cover something that actually is or should be covered or that gives you a false or misleading impression of your rights.
Semtex fixes all
-
13th September 2008, 10:52 AM #5GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
And the drill/chuck is made where???
-
17th September 2008, 08:25 PM #6Novice
- Join Date
- Aug 2008
- Location
- Geelong
- Posts
- 16
Hey all thanks for the advice. It really isn't right that a brand new chuck is not covered by warrantee. The hardware that sold it to me wasn't the authorised repairer for DeWalt. The seller was helpful in finding the account reciept then I took it to the local agent, who is now fixing it for no cost. Armed with what you guys have said might come in handy one day.
It seems highly likely that it was made too brittle during the toughening process.
They said the chuck is made in Germany (Didn't say anything on the chuck at all though) and you've gotta wonder if they are going to replace it with the same one. Definately hope not! Although it was very nice to use etc ( I was quite impressed with it) it wouldn't be worth it if it breaks again. Hope they get it fixed quickly. Missing it heaps.www.myspace.com/carpenterrific
Looks like I'm going to keep blaming my tools because:
"Poor tradesmen blame their tools. Rich tradies just go and buy new ones..."
-
26th September 2008, 07:34 PM #7Novice
- Join Date
- Aug 2008
- Location
- Geelong
- Posts
- 16
Got the drill back this week. Same chuck. Hoping it doesn't do it again. It functions really well, one of the easiest to use. It's good to have it back. The grunt it has is ridiculous.
www.myspace.com/carpenterrific
Looks like I'm going to keep blaming my tools because:
"Poor tradesmen blame their tools. Rich tradies just go and buy new ones..."
-
26th September 2008, 09:47 PM #8GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
Pleased to hear it. Let's hope that all is well.
Just in case,
Take a few moments to document all that has happened including who you spoke to , dates and times - unfortunately, necessary should something else go wrong.
Enjoy your drill.
Regards,
Bob
-
5th October 2008, 06:55 PM #9Novice
- Join Date
- Aug 2008
- Location
- Geelong
- Posts
- 16
Yep a good idea Bob. Give it a few months of other dramas and hassles in life and evrything about this chuck will have blurred beyond my memories abillity. If I don't write things down I forget. Thanks.
www.myspace.com/carpenterrific
Looks like I'm going to keep blaming my tools because:
"Poor tradesmen blame their tools. Rich tradies just go and buy new ones..."
Similar Threads
-
Drill press chuck problems?
By lukewarm in forum GENERAL & SMALL MACHINERYReplies: 7Last Post: 16th December 2007, 03:22 PM -
Impact Driver vs Battery Drill
By rhancock in forum HAND TOOLS - POWEREDReplies: 22Last Post: 15th November 2007, 01:34 PM -
Triton 18V battery Drill
By Bob38S in forum TRITON / GMCReplies: 6Last Post: 14th August 2006, 10:50 AM -
Battery Powered Screwdriver/Drill
By Fat Pat in forum HAND TOOLS - POWEREDReplies: 11Last Post: 4th August 2005, 06:18 PM