Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
Thread: 52cc e-bay chainsaw
-
4th June 2007, 01:45 AM #1Intermediate Member
- Join Date
- Sep 2006
- Location
- vic
- Posts
- 32
52cc e-bay chainsaw
hi i'm just wondering if anyboby has bought or used one of the 52cc e-bay chainsaws on their mills as yet? if so how did it go!
i'm only milling small stuff but using my dads old stihl 07s just isn't working out as it's big, it's heavy has no chain break and has a kick back as you start it that near rips your arm off.
have a tight budget so a new brand name is out of the question and having trouble finding a half decent second hand one, been looking on e-bay, trading post, clearing sales and locals that i no in the logging industry.
thanks
simon
-
4th June 2007 01:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th June 2007, 02:01 AM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,800
Simon, I can't comment personally on these saws but some folks over on ArboristeSite.com have been reckoning they are a good example of getting what you pay for. The main problem is quality control, some will last OK but others will need to be taken back to the store - er ebay, er . . . . . who did you buy it from again? You'd be better of buying a cheapy from Bunnys. If you live near a Bunny's store it may not matter but if you are miles from nowhere trying to mill a log - Bummerrrr!
-
4th June 2007, 01:17 PM #3
Stick with the old Stihl
It might be heavy and lacking a chain brake.. (thats not such an issue if you have it bolted to some sort of mill) but it still works after 'x' number of years.
Keep an eye out for a big ole Stihl or Husky from that vintage and spend your hard earned $$ on fixing that up instead. It will probably be heavier and even harder to start, but it will be 10 times better for milling.
Cheers
Ian
-
4th June 2007, 05:15 PM #4
I wonder what people who actually purchased one of these think of them
-
4th June 2007, 05:27 PM #5
I cant see anywhere on those listings that says they have a warranty. At least if you get a bunnies unit you will get 12 months warranty.
My electric McChulloch CS was about $160 and I have milled a fair bit of hard dry redgum with it and its still going strong. It cuts much better with a Stihl Picco chain on it rather than the low-kickback chain that comes with it.
Those ebay saws must be a rip from a Jred or Husky, so I'm sure parts are available.
Post some pics of your Stihl, are you sure its an 07 or do you mean 076?
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
4th June 2007, 10:02 PM #6Intermediate Member
- Join Date
- Sep 2006
- Location
- vic
- Posts
- 32
it's definatly a 07s my dad bought it in 1961 still has all the paper work.
i found it on the stihl web site. i'll take some pic's and post them if i can.
the timber i'm milling is silver wattle(acacia dealbata) in the same family as the blackwood a lighter wood with a light brown, pink look to it.
thanks to every one for their input.
simon
-
4th June 2007, 10:35 PM #7
This the model you've got?
Cheers
DJ
ADMIN
-
4th June 2007, 11:16 PM #8
Well, I accidentally bought one of those 52cc saws off ebay, basically because I got it for under $100 on a last minute bid where no other bidder seemed to be staying up to snipe it off me
Anyone got it in the mail and assembled. Actually, its pretty good for the price. The finish seems reasonable but you casn notice the cost cutting components, like plastic fuel/oil caps, and pretty dodgy choke control etc. But it all works and came with a decent bar and Carlton chain. The motor seems to have plenty of grunt... definitely 52cc worth and I've chopped up quite a few trees with it and it had no troubles. As long as you look after it well and run in the engine a little before getting into the big stuff, it seems to work fine. As good as any low priced bunnies saw.
Ive used it in my mill too and it worked fine. Slow going, but I was cutting quite dry hardwood so slow was the order of the day.
Would I buy one again? If I could get one for around $200 delivered, I say yes. Mine was a real bargain, because somehow, they sent me two saws for the price of one!
I reckon they are pretty good for the $$.
As I said, if you treat em like crap, they probably wont last, but so far mine are purring like babies with a lot of TLC in betweenHow much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
4th June 2007, 11:31 PM #9Intermediate Member
- Join Date
- Sep 2006
- Location
- vic
- Posts
- 32
thats the one dj.
thanks dean it sounds like the chinese crf 50 copy motorbike i bought for my son then, maintainance is the one thing i am half good at.
thanks again.
-
4th June 2007, 11:45 PM #10
Yeah i bought my boy one of those Chinese 110cc quad bikes they are flogging off on ebay for cheap these days. Goes alright so far (had it for 2 weeks). Making sure to run it in properly though. Already changed oil twice (first to get rid of the chinese rice oil in the motor, and second after first tank to get rid of any dodgy bits that come off the insides during first use).
Has plenty of guts and spare parts are cheap tooHow much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
9th June 2007, 12:55 PM #11
G'day Simon,
You have caused me to re-live very unpleasant memories
of a recent eBay purchase of the 52cc chainsaw.
I am an avid user of eBay and love it ... this purchase
was my one and only disappointment.
Will be happy to give details via E-Mail if you wish.
Allan
-
9th June 2007, 05:57 PM #12New Member
- Join Date
- Apr 2007
- Location
- Cooroy
- Posts
- 8
-
9th June 2007, 06:44 PM #13Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
-
9th June 2007, 07:05 PM #14
Hi,
Purchased mine for $170 on eBay only to find the automatic oil
pump was not working. My son-in-law got one at the same time
for $160 and his oil pump was flooding oil everywhere. I contacted
the company who sent me two new oil pumps to be fitted at my
own expense. The repair shop fitted them but still did not work
properly. Took mine back to the repair shop who stated,
a) cheap junk - dont waste your money.
b) dont bring the chainsaw back again - will not touch it.
I contacted the seller again and requested a complete new
chainsaw as I would not be spending anymore on repairs.
Seller refused and offered to send me another oil pump.
I then stated that I would re-advertise my chainsaw on eBay
for next to nothing, display it as their brand and describe it
as rubbish and may only be good for spare parts. This brought
a response from the company claiming that I will need a good
lawyer as they would sue me for all I was worth.
I am currently cutting my firewood with it by cutting two blocks
of wood, dribbling oil onto the chain then cutting two more, then
more oil etc.
Do your self a favour spend your money on a proven brand.
-
9th June 2007, 07:14 PM #15
Gday Allan, should be able to get your saw oiling again. Post some pics of the new and old oil pumps and some of where it goes on the saw as well as the saw itself. You may be surprised at the knowledge here and very well could get it working properly again with the advice given.
I knew zero about chainsaws, but with help here and another forum I am half way through a complete rebuild of a Stihl chainsaw.
Start a new thread if you want.I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
Similar Threads
-
Thats not a chainsaw...this is a chainsaw...
By Purpleheart in forum NON WOODWORKReplies: 19Last Post: 26th July 2008, 10:57 PM -
ripsawing with a chainsaw
By weisyboy in forum HAND TOOLS - POWEREDReplies: 42Last Post: 3rd June 2007, 06:36 PM -
Chainsaw jigs and sharpening
By Tiger in forum WOODTURNING - GENERALReplies: 27Last Post: 27th June 2006, 10:30 PM -
chainsaw mill & a good big chainsaw
By Cliff Rogers in forum HAND TOOLS - POWEREDReplies: 33Last Post: 18th April 2006, 08:51 AM -
Chainsaw mills.
By outback in forum WOODWORK - GENERALReplies: 12Last Post: 9th May 2005, 07:56 PM