Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 28 of 28
Thread: Automated milling and joinery
-
10th May 2010, 09:45 PM #16.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Short version.
Just after WWII many of the villages in Northern Italy were largely in ruins and a huge rebuilding program began. In the early 1950's two of my uncles decided to set up a business making door and window frames. These were at first made by hand, including some complex detail made using moulder planes. There was also a big call for roof replacements and once they got that established they started in on new roofs as well
Then slowly they got enough money to start buying machines and then the business really took off. When the Uncles retired in the late 80s, the business spilt into two. One set of cousins went with the mountain huts, roofs and structures, and another cousin went with doors and window frames side.
They got their first computerizes machines about 10 years ago and the big Hundegger in 2005
I'll post some pictures of the "door and window frames" cousin's workshop when I get round to sorting out my photos.
-
10th May 2010 09:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th May 2010, 11:59 PM #17
A bit of everything there BobL, automated machine , snow capped mountain views, a nice little foot bridge, a bit of familly history, things made from wood, firewood stashes,
excellent BobL
Pete
-
11th May 2010, 01:02 AM #18.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
13th May 2010, 10:01 PM #19SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Coffs Harbour
- Posts
- 575
Good work bob, good to see there is still some building going on not dictated in cost by banks or accountants but by culture & style.
regards inter
-
14th May 2010, 09:37 PM #20
Looks like you had a good trip Bob. You must have a panorama or two to add to this?
Wonderful stuff.
Kevin
-
14th May 2010, 10:25 PM #21.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Cheers Kev!
Yep - took quite a few panoramas, still haven't had time to stitch them together. I posted a few pics in the photo forum.
-
15th May 2010, 01:36 PM #22
Hi Bob,
What a fantastic holiday. Postcard settings and massive wood machines making sawdust, what more could you ask for. Lucky devil.
Thanks for sharing. Very interesting.
Cheers
Pops
-
15th May 2010, 05:46 PM #23.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
15th May 2010, 06:08 PM #24
Bob, you are living the dream. That is fairytale stuff.
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
15th May 2010, 08:51 PM #25.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Cheers M.
I only tell you guys half the facts - there's an equivalent amount of politics and crap that I have to deal with that you guys don't hear about.
Canada should be good though. We're also stopping in Seattle (guess what I have a relative there as well!!) and I hope to go to Madsens (big chainsaw and milling shop) just out of Seattle. A couple of Canadian guys from the Arborisite have said they will show us a bit of milling and woodworking stuff so that should be good.
-
16th May 2010, 11:47 PM #26
Hi Bob,
We will be expecting more photos of course mate.
Cheers
Pops
-
17th May 2010, 12:42 AM #27.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
Here's a few more shots from Italia from the "Door and Window" frame making cousin's workshop.
Here's the house where his family and his mother and father live.
CLose up of wood work on balconies
His workshop is underneath his house.
Combo machine with power feed assist.
Hydraulically assisted frame setter.
Four sided jointer
400 mm digital planer
750 mm sander
The were about the same number of machines I did not photograph including a huge bandsaw, another sanding machine, two mortising machines, and another big dust extractor.
Nothing gets wasted
-
17th May 2010, 11:39 PM #28
Thanks Bob. A lot of machinery under one house. Another lucky chappy. I like that SCM planer/thicknesser, a beauty. A very compact dusty in the background too.
Cheers
Pops
Similar Threads
-
What is joinery???
By benupton in forum WOODWORK - GENERALReplies: 2Last Post: 29th November 2009, 01:29 AM -
Timber Joinery
By Carissa in forum WOODWORK - GENERALReplies: 7Last Post: 10th January 2006, 12:43 AM -
gum in joinery
By helga in forum TIMBERReplies: 31Last Post: 6th August 2005, 09:47 AM -
Beadlock Joinery
By Corunetes in forum WOODWORK - GENERALReplies: 16Last Post: 11th December 2004, 09:02 AM