Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Corymbia torelliana - 'Cadaghi'
-
16th June 2011, 11:23 AM #1Intermediate Member
- Join Date
- Jul 2010
- Location
- Tyndale, NSW, Australia
- Age
- 70
- Posts
- 28
Corymbia torelliana - 'Cadaghi'
Amongst a pile of logs that my tree lopper friend has set aside for me is one 5.3m * .8 m. It looks great and when i looked, aside from noticing numerous small indentations particularly near the top end of the log there was not much to identify it. Had been down for a while (6 mths?) and the bark was mostly flaked off. While some basal bark looked chunky and thick (2.-3 cm) the upper bark on this log was smooth but still fairly thick. (1cm). That is how I remember it anyway.
Thougth no more of it until I was cycling into Brisbane and noticed some cadahgi. Chunky basal bark, smooth bark by the first fork and those indentations (about the size of a 2" nailhead)
Now if it is a cadahgi
-how will I know as there are no leaves, is the timber distinctive?
-what use does it have? Structural or slab?
Weisyboy suggested slabbing back in this post
https://www.woodworkforums.com/f132/w...urning-107978/
If I have to slab does anyone have experience with the timber? I suspect it may show a lot of collapse like the angopheras I have done and need to be slabbed thicker. Maybe 65mm.
I am not looking forward to lifting one of these slabs either.
Suggestions please
Gary
-
16th June 2011 11:23 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th June 2011, 07:59 PM #2
I can only quote Exador in here I ve not any experience with it but its said to be a very underated timber similar to spotted gum
-
17th June 2011, 10:10 PM #3
Ive cut up a couple of small ones, from just looking at the stickered stack seems to be drying ok, haven't used any of it yet, a few others here have cut it, Sigidi used some for roof rafters for lama pens (if I remember) seemed to be ok
Pete
-
25th June 2011, 05:48 PM #4
Hey Pete, great memory!!!!
I've cut a fair bit of Cadaghi and I think it is really pretty, has quite large sapwood tho and the sapwood is Lyctus susceptible so you need to treat it somehow, but I've done step treads, roof battens, chopping boards, coffee tables, and a benchtop out of it all seem to be good except the step treads - but in defence of the step treads they had over 100m of roof emptying onto them and got a constant 'watering' as I didn't get to put the gutter up and the roof terminated over the top of them.
My advice halfdays is slice 'er up....if you don't want to I'll have itI love my Lucas!! ...just ask me!
Allan.
-
25th June 2011, 09:12 PM #5
Hi Allan, How's it going? I suspect by your bit of an absence u have been very very busy or nowhere near a puter or tied up with "other" matters. Hard to keep em happy aint it!!!
The memory mm sometimes it works! Maybe it was an association thing that stuck....roof battens and lamas....and maybe it was your diversification into the unusual....
Did the step treads just rot out quickly with all the water?
Hope it's all going well.
Pete
-
29th June 2011, 09:09 AM #6Intermediate Member
- Join Date
- Jul 2010
- Location
- Tyndale, NSW, Australia
- Age
- 70
- Posts
- 28
Thank you all for those comments. When I got back to the loppers yard I opened my eyes and immediately realised it was not a cadaghi. Talked to the bloke who cut it as well though he was unsure what species it is. Reckons he will drops cadaghi occasionaly and will bring them back to the yard next time.
Now have a sample of the bark and the wood. Will take it down to a friend of mine who has much more experience than me. The timber has a lovely golden wavy fibre/grain. Very tough.
Have never slabbed anything near that big before. Should be an interesting exercise. Lucky there are machines there that can move the slabs.
-
29th June 2011, 09:09 PM #7
Pete, yeah been a bit busy getting rid of the old family home, settling 'money' issues with the ex wife etc. that stuff is all over and some new things on the horizon for Al soon
Anyway Cadaghi step treads, they where still there when I sold the house, but I think they really should be replaced, although they lasted 4 years getting constantly hammered by so much water.
And yeah I'm doing well thanks PeteI love my Lucas!! ...just ask me!
Allan.
-
29th June 2011, 11:51 PM #8
Good to hear Allan hopfully you ll pop in here a bit more now then, Hope you dont end up going to far South
-
9th July 2011, 12:30 AM #9Senior Member
- Join Date
- Sep 2009
- Location
- MOOLOOLAH VALLEY 4553
- Age
- 76
- Posts
- 114
Well ifn you do get onto any Cadaghi keep it, very pretty grain, good colour and can have a bit of wave in it. I've milled a few as they were planted around Awfulville some years back as a "bait" to keep the monolepta beetles away from the avocados. Which didn't work by the way. Go figure....no-one told the beetles. So quite a few folk planted 'em as windbreaks, of course just adjacent to the aforementioned crop.
To add insult to injury and stupidity they dropped a sticky exudate from insect activity on the foliage onto your car if parked beneath.
And I never had any trouble with borer in the sapwood in packs out in the field, strapped and covered with corro. Sold it before I could get around to making a table from it.
For what it's worth.
cheers,
richie
Similar Threads
-
Tuesdays Milling - an orphan Cadaghi
By Sigidi in forum SMALL TIMBER MILLINGReplies: 10Last Post: 5th November 2008, 05:47 PM -
Cadaghi
By Ibanez in forum TIMBERReplies: 3Last Post: 7th October 2008, 04:07 PM -
Corymbia Citriodora
By HUON in forum BOAT BUILDING / REPAIRINGReplies: 12Last Post: 17th February 2008, 09:47 PM