Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Milling in Manjimup...
-
7th July 2014, 02:25 PM #1SENIOR MEMBER
- Join Date
- Sep 2013
- Location
- Jarrahdale WA
- Posts
- 370
Milling in Manjimup...
The boss has a farm in Manji, and has a couple of big-ish logs to be milled. One Jarrah on the property that I know of has been down a long time..
Long enough for the barbed wire underneath to be rusty, and there's some others.
Anybody interested?
-
7th July 2014 02:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th July 2014, 07:31 AM #2
David, if you get no luck on here, give Lucas a buzz and they will put you onto a local with a mill
I love my Lucas!! ...just ask me!
Allan.
-
8th July 2014, 09:18 AM #3
Hello David
A couple of questions if I may.
Are you able to post some pictures?
Is there good access, or does it require a 4WD, mountain goat and a Sherpa?
Any idea of the dimensions?
Is there a fee?
I am interested, I live in Port Kennedy
Thanks'
Willy
-
8th July 2014, 10:51 AM #4SENIOR MEMBER
- Join Date
- Sep 2013
- Location
- Jarrahdale WA
- Posts
- 370
Manji Milling...
Are you able to post some pictures?
I'll get the boss to take some this W/E
Is there good access, or does it require a 4WD, mountain goat and a Sherpa?
the logs are in open paddocks, as I recall quite flat, but this time of year is as slippery as so a 4WD is probably a must have..
Any idea of the dimensions?
Ummm...all I can remember is thinking they were quite big..pics will tell...
Is there a fee?
PM with phone number sent...
Similar Threads
-
About time to see some milling on the small milling forum!
By Sigidi in forum SMALL TIMBER MILLINGReplies: 16Last Post: 21st December 2011, 07:22 PM -
Milling in BC
By BobL in forum SMALL TIMBER MILLINGReplies: 10Last Post: 17th August 2010, 06:13 AM -
Saw Milling
By DJ’s Timber in forum WOODIES EVENTSReplies: 11Last Post: 5th March 2008, 11:07 PM -
which milling M/c
By Oldhack in forum METALWORK FORUMReplies: 11Last Post: 26th March 2007, 09:19 AM -
Milling Red Gum
By Graham Jones in forum TIMBERReplies: 0Last Post: 11th July 2004, 10:14 AM