Needs Pictures: 0
Results 1 to 5 of 5
Thread: First run with the Alaskan mill
-
14th October 2017, 12:44 PM #1Novice
- Join Date
- Sep 2017
- Location
- FNQ
- Age
- 67
- Posts
- 12
First run with the Alaskan mill
We had several white cedar come down across the driveway after a recent cyclone so I brought a chain saw mill off Ebay and made use of the timber. I started out making a couple of rocking chairs which I have always wanted to do but firstly I had never seen a rocking chair before so I had to make a prototype to test out the shape and dimensions so the first one got cut down and reassembled several times until I wound up with what I think is about right. White cedar is such pretty timber I thought it was worthy of making something special out of it.
The thing I like most about milling good logs is after taking the first several cuts it's like opening the lid on a jewel box and seeing the jewels inside.
P1030192.jpgP1030046.jpgP1040229.JPG
-
14th October 2017 12:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th October 2017, 02:53 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,790
Yep its like Christmas or a lucky dip on every cut!
Try lifting the start end of the log to get the log on a slope - that way gravity is your friend and if you have the saw and chain setup right the mill will cut on its own.
bobsmillingstyle.jpg
-
14th October 2017, 06:22 PM #3Novice
- Join Date
- Sep 2017
- Location
- FNQ
- Age
- 67
- Posts
- 12
-
14th October 2017, 06:26 PM #4
Most under rated timber is White Cedar IMO
Can have the most beautiful fiddleback at times and the colour is sweet too
Nice work olmate...and continue to enjoy your milling ...MMMapleman
-
14th October 2017, 07:11 PM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,790
Yeah - don't get many that run on their own - the slope has to be just right - too much and the saw can bog down, not enough and it cuts too slowly or stops altogether., but when all the planets align it sure is nice to sit back and let it rip.
Of course it didn't go all the way down on its own and got snagged up on that bit that's flaring out from the side of the log - had to get up off the chair and finish that bit with my hands on the mill.
BTW the stubby was empty - I had that photo taken for an OHS/safety seminar my Brother was giving at his workplace - it was a series of photos - some real and some staged, and his talk was called, "Spot the risk"
Similar Threads
-
Alaskan Mill - opinions?
By Evanism in forum SMALL TIMBER MILLINGReplies: 19Last Post: 29th October 2014, 10:26 AM -
alaskan mill
By seth mac in forum SMALL TIMBER MILLINGReplies: 3Last Post: 17th December 2011, 09:45 AM -
Alaskan Mill
By Softbreeze in forum SMALL TIMBER MILLINGReplies: 4Last Post: 15th June 2009, 10:27 PM -
alaskan small log mill
By weisyboy in forum SMALL TIMBER MILLINGReplies: 52Last Post: 14th June 2007, 06:31 PM