Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Burying a shipping container
-
28th June 2009, 11:33 PM #1
Burying a shipping container
Need some thoughts
Is it possible to bury a 20 foot shipping container and have it as a cellar.
It would be under the house slab.
My concern would be the rust.
Could I just have it on some concrete piers and wrap in plastic as in in under concrete slab tyoe,
Just a thought.
Or may just use ICF Insulated concrete Form.
Not sure what is the cheapest way to build a cellar under the house.
The house is yet to built, plans with council now.
Any ideas appreciated.
Cheers
Pulpo
-
28th June 2009 11:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th June 2009, 11:54 PM #2Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1,205
dont think the container will take the horizontal load from the soil, ICF would be the best method. with liquid membrane applied to the external walls.
i think it would cost you $$$ to get an engineer to design supports and footings for the container so that you could get it past the building inspector.
-
29th June 2009, 12:04 AM #3
The benefit of using a shipping container as a cellar escapes my comprehension. As you've noted, rust would be a major concern, so its structural reliability would be questionable. A crane will be needed to place the container, at extra cost, provided that crane access is feasible. In situ concrete foundation would likely be less dear. The slab above should be designed to span the cellar, whatever its construction. Excavation for the cellar will be substantially equivalent.
Is a cellar necessary at all? Council review of your plans may have additional comments.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
29th June 2009, 12:09 AM #4
Buried concrete tank Mate of mine has a big one under his two story house. He used receycled brincks to build a wall of two arches through the middle of it to support the slab, it is a fantastic cellar. All council approved, just had to have an exhaust fan in it that recirculated the air from outside.
-
29th June 2009, 01:53 AM #5
Hmm
There goes my cellar idea.
The was some thought; and no a cellar is not necessary.
Yes the slab on top would support the span.
it was the rust rather than the piers.
I just happen to have access to a cheap shipping container.
And no do not need another one to store more tools in.
ICF will be the go me thinks, for the cellar.
Cheers
Thanks
Pulpo
-
29th June 2009, 06:47 PM #6
What about some huge concrete colverts from road/bridge construction. designed to carry load.
Cheersregards
David
"Tell him he's dreamin.""How's the serenity" (from "The Castle")
-
22nd July 2009, 12:50 PM #7Awaiting Email Confirmation
- Join Date
- Mar 2008
- Location
- Brisbane
- Posts
- 1
Dont forget that concrete is porous and there will be water seepage. You will need to design a collection furrow and a sump with a bilge pump (with a level switch)
I would do it properly:
- Dig big hole
- lay cellar slab
- cast perimeter concrete walls (heavily reinforced)
- bitumin coat outside of walls
- build internal support walls
- cast slab on top
- build house on slab
Of course the concrete tank or box culvert will also work with a waterproof coating on the outside.
Similar Threads
-
My first container
By Zarguld in forum WOODTURNING - GENERALReplies: 10Last Post: 20th April 2008, 12:04 AM