Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Help Selecting Seat Foam
-
24th February 2013, 01:02 PM #1New Member
- Join Date
- Feb 2013
- Location
- United States
- Posts
- 1
Help Selecting Seat Foam
I am restoring a antique parlor chair and I was wondering what grade foam I should use for the seat cushion. The seat originally had plant fiber, horse hair, and a cotton pad in it. And the cushion has coil springs underneath it. I am new to all of this so I'd appreciate your patience Thanks in advance!
I attached some pics of the chair
-
24th February 2013 01:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th July 2013, 11:29 PM #2Senior Member
- Join Date
- Apr 2012
- Location
- Melbourne
- Posts
- 293
I would strengthen the frame a bit then use elastic webbing instead of springs... As a cushion I would use HR32-90 foam (about 100mm thick)
That will give you nice comfy bouncy feel and it will last quite a while...
Alen
-
16th September 2013, 10:09 PM #3GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
IMHO any foam is a waste of your time and effort. They all feel bad and dont last. If you still have it wash the original filling and reuse it for a more authentic and longer lasting seat. They always used to rewas and rstuff the horsehair regularly. It lasts forever, foam does not.
-
28th April 2018, 05:57 AM #4SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 699
Now that's going to help me avoid another restoration mistake. After reading your comment I did some reading and found I'll be happy to take the horse hair stuffing and cleaning it for reuse. I'm even thinking I can build some stock from old wrecked furniture (unless I can rebuild it) to use on furniture where people have already thrown it away. Great advice, thank you.
Similar Threads
-
Need your advice in selecting Edgebander
By legno in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 5th August 2018, 06:17 PM -
Help selecting a suitable timber
By Newoodworker in forum TIMBERReplies: 5Last Post: 9th December 2011, 10:02 AM -
Selecting capacitors for motors
By Garry 3 in forum METALWORK FORUMReplies: 5Last Post: 24th November 2011, 06:40 AM -
Selecting a No. 6 - advice and experiences?
By Tools4Me in forum WOODWORK - GENERALReplies: 6Last Post: 25th October 2011, 09:20 PM -
Selecting support for a deck
By tinsmith in forum TIMBERReplies: 8Last Post: 21st November 2003, 08:28 PM