Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5

Thread: Roof lining

  1. #1
    Join Date
    Feb 2009
    Location
    Adelaide
    Posts
    19

    Default Roof lining

    This may be in the wrong thread but You fellas would definitely be more expert than I am at this.
    I have an old 1992 Toyota Troopie and am taking it around on the "Grey Go-mad" tour next month, Slowly modifying bits and pieces and the other day and I noticed that the roof lining is hanging down in places, I dont want it flopping down on us while we are sleeping in it or while driving so how do I do a quick but effective fix on it.
    It's probably isn't worth doing a complete new liner job on it, the old girl is costing a lot already, ( so is the car). I would welcome some simply and easy suggestions for a simple man.
    Ta in advance.
    Mike

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    Posting a couple of good mclear photo's would help, it will make a decision much simpler, very difficult without seeing what the situation is

  4. #3
    Join Date
    Feb 2009
    Location
    Adelaide
    Posts
    19

    Default Roof lining

    Thanks China
    I will have a go at the photos, last time I tried posting them I made a hash of it and have given up since, will try again. The lining is old and is only dropping along the rear edge so far, I would like to arrest it before it gets any worse. I was considering trying to inject some latex glue through the lining and then pressing it back onto the roof but don't know if I'm liable to make a mess of it. Maybe some spray adhesive?
    Thanks
    Mike

  5. #4
    themage21 is offline So that's how you change this field...
    Join Date
    Aug 2012
    Location
    Emu Plains, NSW
    Age
    40
    Posts
    136

    Default

    Spray contact adhesive should work as a reasonable fix, but depends on you being able to rip enough of the liner down to spray the fabric and the foam before re-application. Handy thing is that provided you wait till the glue goes tacky, you don't have to support it once you've pushed the liner fabric to the foam. Should also work in the areas where the liner goes straight onto the metal.

    If you're having issues getting a hold of a decent spray contact adhesive, I've just brush applied before and it works fine, but you go through buckets of glue as you're driving it into the fabric/foam instead of just laying a fine coat on top.

    Just make sure that you have all of the windows open, that stuff really stinks and can ruin your sense of smell for days with all of the solvent that normally comes off it.

    EDIT:
    Note that the liner glue normally fails after hot weather and normally gets pretty weak all over, but only actually falls off in patches at a time. This can develop into an annoying situation where your previous fix actually makes it difficult to repair future failures. I'd suggest that if you are considering re-gluing your liner and going to the extent of buying spray adhesive (which has a lifetime in the can), it wouldn't hurt to pull the whole thing down and re-do it if you're able. Just make sure you go slow with the pulling, as the fabric also tends to have weakened off at the same time as the glue and may tear.

  6. #5
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    Whether you can succesfully inject something thru the lining to press it back to the roof depends on how much dust has settled on the inside of the lining & whether any underlying foam (if present) is starting to break down. It only takes a thin film of dust/crumbly foam to stop whatever adhesive you're using from binding properly. DAMHIKT.

    To check - and to clean if it is dirty - means un-tucking enough to actually eyeball it.

    And if you're going that far, you're better off using contact adhesive as themage says.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

Similar Threads

  1. shed lining
    By coffenup in forum THE SHED
    Replies: 12
    Last Post: 11th December 2011, 08:11 PM
  2. Replies: 4
    Last Post: 11th October 2010, 02:19 PM
  3. drawer lining
    By android in forum BANDSAWN BOXES
    Replies: 8
    Last Post: 15th November 2007, 11:14 PM
  4. Jewellery box lining
    By Simomatra in forum BOX MAKING
    Replies: 12
    Last Post: 7th June 2006, 07:00 PM
  5. lining for boxes????
    By bob at woodheap vic in forum WOODTURNING - GENERAL
    Replies: 2
    Last Post: 11th April 2000, 12:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •