Thread: gunstock duplicater

not a good idea to show any personal info on internet as you are open to all kinds of nuts. if people wish to contact you they can send a pm to you via this forum (see introduction for info). my advice is to remove the phone number.

anyway, welcome to the forum

p.m.sent

When I used to shoot competitively many years ago Walther had a very nice laminated rifle stock from Beech and I think it was walnut. I was an Anschutz shooter so it was strictly walnut all the way

Look up Geoff Slee rifle stocks, he sells blanks

G'day. When I was Fullbore shooting, a lot of stocks were made from Jacaranda and Mango.
The stock on my Omark44 was Spotted gum.

The timber should be light but dense. It must not move ie twist bend or crack.
These requirements preclude a lot of attractive timbers like sheoak, messmate etc.
Tried and trusted timbers are walnut, maple, Tassie blackwood, beech.
Ive made stocks from other timbers but invariably they did not remain stable and would upset the accuracy of the rifle when the weather changed or temps changed.
Sheoak was a classic, very attractive but not much good for consistant accuracy.
Others may have a different experience but hundreds of years of gunmaking does tend to sort the good from the bad thats why most gunsmiths stick to just a few timbers.

hi tony I have been dabbling in making stocks for a while now but the alloy type with a little timber and also am searching for good stock timber , however would like to duplicate some stocks of my own and make my own duplicator also my email is [email protected] I had purchased a trailer of timber some time back from a tree removal guy , i will hunt his number down[