Results 1 to 8 of 8
  1. #1
    Join Date
    Sep 2016
    Location
    Vic
    Age
    48
    Posts
    49

    Default How to store freshly cut blackwood

    Hi all,

    I live in the Dandenong Ranges and we have lots of blackwoods around.
    The last big one we took down in our garden was used for firewood . I still have another dead standing one to take down when I get round to it.

    This very small one came down in the last storms a couple of weeks ago so I thought I'd try and make better use of it.
    What am I going to use it for? No idea yet. I'm just a beginner so still learning, currently practicing on basic stuff like birdhouses, chopping boards, clocks and other simple stuff, maybe a basic hall table but certainly not high end furniture.
    I have a lathe so could use some for tool handles, rolling pins, pen blanks etc (although it would make a hell of a lot of pens!)

    Whatever's left will go in the Coonara.

    20161101_163543.jpg

    Longest length maybe 12-1500mm.
    Largest diameter is about 300mm but a bit soft in the centre.

    20161101_165233.jpg


    20161101_170956.jpg

    All I've done today is paint the ends and stacked in an open wall shed.

    20161101_171135.jpg


    Given the largest I'm likely to be able to work with is 100-150mm (I currently have a 4" jointer but will look for a 6" before long) do I rip the large straighter pieces in half or quarter to dry quicker? (this would be with a chainsaw). I'm hesitant to try and cut into slimmer sections as if it warps I can re-saw it.
    Is the 1 year per inch thickness rule about right? I don't want to wait 12 years to use it.

    Leave the bark on or strip it?
    Leave in the open air shed or try and clear a spot in my garage for some smaller pieces?

    I tried the search but nothing really turned up.

    Thanks in advance for any advice.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    72
    Posts
    1,220

    Default

    I'd mill it to a size you can use plus a bit, maybe a 1/3 bigger. Then stack it under cover if you can with some weights on it to hold it flat. I'm up near Emerald and can show you how to mill it. PM me if you want it milled.
    I am learning, slowley.

  4. #3
    Join Date
    Sep 2016
    Location
    Vic
    Age
    48
    Posts
    49

    Default

    Quote Originally Posted by Pagie View Post
    I'd mill it to a size you can use plus a bit, maybe a 1/3 bigger. Then stack it under cover if you can with some weights on it to hold it flat. I'm up near Emerald and can show you how to mill it. PM me if you want it milled.

    Cheers Pagie,

    I'm only down the road from you in Belgrave.
    When you say mill it, is it as simple as ripping it as straight as possible with a chainsaw or is it a bit more technical?

  5. #4
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    72
    Posts
    1,220

    Default

    I have a few chainsaw mills. So it can be milled straight. Have a look at the Small Milling site. Go to You tube and look at Alaskan mills.
    If you bring the logs up I'll show you how.
    I am learning, slowley.

  6. #5
    Join Date
    Sep 2016
    Location
    Vic
    Age
    48
    Posts
    49

    Default

    Sounds great. Always keen to learn new things.

    PM inbound.

  7. #6
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    72
    Posts
    1,220

    Default

    IMG_2149.jpgUncle Henry milling his log.
    I am learning, slowley.

  8. #7
    Join Date
    Sep 2016
    Location
    Vic
    Age
    48
    Posts
    49

    Default

    That pic shows how little hair I have left on top

    Thanks so much again for the help yesterday.
    The bonus impromptu turning lesson was great!

    I successfully turned a chisel handle yesterday then found a Titan chisel at the market this morning to fit it.

    I had a crack at turning a bowl which is a bit of a disaster so far but I'll keep at it.


    Just toying up building vs buying a chainsaw mill now.

  9. #8
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    72
    Posts
    1,220

    Default

    I went down to the tool sale at hawthorn this morn and bought a mortiser to fit on one of the chainsaws. Some nice tools there but I think I have enough. Glad you had a go at the turning, it will get easier, come up again and have another go on the lathe.
    Last edited by Pagie; 7th November 2016 at 10:58 AM. Reason: bad memory
    I am learning, slowley.

Similar Threads

  1. Freshly cut timber left in the rain...Problem?
    By oz93666 in forum SMALL TIMBER MILLING
    Replies: 5
    Last Post: 4th November 2014, 09:25 AM
  2. Freshly cut eucalyptus - worth taking?
    By Afro Boy in forum TIMBER
    Replies: 1
    Last Post: 23rd August 2009, 09:48 PM
  3. Freshly hatched.
    By Stevenp in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.
    Replies: 4
    Last Post: 11th July 2009, 04:51 PM
  4. How to use freshly cut timber
    By Sam in forum TIMBER
    Replies: 7
    Last Post: 10th July 2009, 10:07 PM
  5. what is the best way to dry a freshly turned green bowl ?
    By buzzby in forum WOODTURNING - GENERAL
    Replies: 11
    Last Post: 1st April 2007, 07:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •