Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Storing MDF
-
2nd January 2006, 03:16 PM #1Member
- Join Date
- Apr 2005
- Location
- -
- Posts
- 68
Storing MDF
Just a quickie: What's the best way to store sheets of MDF? Flat or upright against a wall? The ones in question are 16mm thick, but I need them as flat as possible...
-
2nd January 2006 03:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd January 2006, 03:57 PM #2
Laying down flat on gluts @ 800 crs. (that's how laminex supply/store it)
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
2nd January 2006, 04:15 PM #3
Careful Mick.
We really need to know if it is old growth MDF or the plantation stuff.
Seriously; I store mine in a rack, vertically, but lifted on spaced pieces so that damp cannot get into the edge from the concrete floor. I just don't have enough space to store it flat.
MDF is a "buy as you need it" product for me so I never have it stored for long, save for scraps.
It only takes one drink to get me loaded. Trouble is, I can't remember if it's the thirteenth or fourteenth.
-
2nd January 2006, 04:36 PM #4
Flat is the best.
All sheet stuff (mdf ply & pb) stored on edge will end up bowed.
-
2nd January 2006, 05:05 PM #5Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
I only buy plantation grown 1/4 saw mdf.
Al
-
2nd January 2006, 09:39 PM #6GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
As said above, flat is best if you can give it enough support - I'd think 450 spacing rather than 800.
If you are like me, and few others by the sound of it, upright works if you have to, but it will try to take a 'bow' - you really need to have it resting on a series of 'A' frames & off the floor.
When I get the racking for my garage conversion, I will be making a platform on casters, 2400x600, with 'A' frame supports & bins for off cuts.
-
2nd January 2006, 10:48 PM #7
Bsrlee,
I specc'd 800 as that's how it's stored and supplied. Presumably Stickmangumby doesn't want the stuff hanging around for more than about 6 months anyway. It doesn't hurt to give it more support though, I've got a platform 600 off the ground with bearers @ 300 centres as I buy 30 sheets of white aquaboard at a time plus usually a few sheets of the coloured MDF and a dozen sheets of 4mm white ply.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
3rd January 2006, 08:45 AM #8New Member
- Join Date
- Jan 2006
- Location
- Syd- Aust
- Posts
- 2
as said, flat is the best but upright is just as good if used on a "A-frame" but also make sure its sorted!! larger sheets/off-cuts across the back just so they are able to rest against each other...
ive grab a few off-cuts through the yr from work and they keep their straightness
Similar Threads
-
MDF help
By tinatina in forum FINISHINGReplies: 14Last Post: 14th December 2007, 10:35 PM -
MDF expansion in humidity
By zenwood in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 27th June 2005, 11:49 AM -
I'm allergic to MDF
By Craig Gordon in forum WOODWORK - GENERALReplies: 11Last Post: 2nd September 2004, 09:32 AM -
MDF Project on TV
By Iain in forum WOODWORK - GENERALReplies: 4Last Post: 17th April 2002, 03:33 AM