Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
27th August 2011, 10:11 PM #1New Member
- Join Date
- Aug 2011
- Location
- Australia
- Posts
- 1
timber flooring in wet basement area
I have basement that can flood at times.I've installed pumps but it can still get wet so I want to build rasied timber floor but Im not sure what timber flooring to use. Im looking at yellow tongue structural flooring but not sure if it handles wet areas. I've looked at Marine plywood and cement sheeting but too expensive. Any suggestions would be great
-
27th August 2011 10:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th August 2011, 08:04 AM #2SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
fibre cement sheeting is the proper way to sheet a wet area.
justin
-
29th August 2011, 01:06 PM #3Intermediate Member
- Join Date
- Aug 2011
- Location
- Brisbane
- Posts
- 38
The best timber to use would be joists and strip flooring in Cypress Pine. Pack the joists off the floor a little with offcuts of FC sheeting. for added protection you could also use a wood preservative treatment, such as Wattyl Stop Rot. This will stain the timber slightly, so don't use it on the top of the strip flooring if you want a clear polish finish.
-
8th September 2011, 11:05 AM #4New Member
- Join Date
- Sep 2011
- Location
- Melbourne, Victoria
- Posts
- 4
i would reccommend our wax sealed flooring,
its specifically designed to prevent water absorbtion,
however it is laminated flooring, but still has the surface presentation of genuine timber
its click and lock too, so its very convenient to install,
if anything, we perhaps may be able to send you some samples if visiting us would be too much of an inconvenience,
email us if you are interested
- [email protected]
-
9th September 2011, 04:32 AM #5
I'd go along with Ken's idea.
You'll need airflow around and between the boards, unless you like the idea of mould and mildew growing underneath.
So joists and spaced floor-boards (think "indoor deck") would be the best solution.
I'd also look at using galv. saddles to raise the joists an inch or two off the concrete. Ferro-cement sheeting will still have dampness between the sheets and timber for protracted lengths of time and you really want to avoid that!
- Andy Mc
Similar Threads
-
timber i.d {blackall area}
By bench1holio in forum WOODWORK - GENERALReplies: 6Last Post: 15th September 2010, 09:04 PM