Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Timber type
-
6th July 2014, 07:44 AM #1
Timber type
Can anyone identify this timber, please. It is a heavy timber, probably some type of hardwood. It has been oiled which makes it a bit harder to identify. The item is a nutcracker that a friend bought and wants a new mallet made in the same timber.
IMG_0270.jpgIMG_0271.jpgIMG_0272.jpg
-
6th July 2014 07:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th July 2014, 08:38 AM #2
Greg ! with the light flecks through it ,I would hazard a guess at "Merbeu" not the right spelling but I think its used a lot in decking , I think I made a pepper grinder from some laminated pieces at some stage cheers ~ John
G'day all !Enjoy your stay !!!
-
6th July 2014, 12:20 PM #3SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
looks to me like an old redgum fence post, the grain doesnt seem open enough for Merbau
-
6th July 2014, 07:47 PM #4
Not Merbau (Kwilla) IMO, and if it is a local timber, my guess would be Ironbark
Neil____________________________________________Every day presents an opportunity to learn something new
-
6th July 2014, 07:55 PM #5
I agree with Shedbound, it doesn't look at all like any Merbau I've handled. My bet would be on some species of Eucalypt, too. If it came from around Brisbane, it's probably unlikely to be Redgum, more likely Ironbark, or possibly Forest redgum, perhaps, but I wouldn't bet money on any particular one, given it has aged & stained with use or oiling, etc. I reckon you could use any of quite a few different Eucalypts, and as long as the colour is close enough to start with, a bit of age & oiling will give you a pretty good match...
Cheers,IW
-
6th July 2014, 10:36 PM #6Senior Member
- Join Date
- Sep 2008
- Location
- Wongawallan, SE Qld
- Posts
- 161
heavy hardwood in Brisbane looking like that - I'd suggest Blue-gum
like this
-
10th July 2014, 04:49 PM #7
Thanks for the replies. Oiled timber is hard to identify
-
10th July 2014, 07:05 PM #8
My guess would be Bluegum also, bit hard to tell for sure with your photos though.
Any chance you could take a thin shaving off one side ( a side with the red heartwood ) with a sharp chisel to expose some fresh timber, then post a photo.
Or even if you used a scraper to scrape the exposed surface off.
I have got some Bluegum offcuts here, I can send you a piece if you like.Brad.
-
10th July 2014, 07:38 PM #9
Thanks for the offer Brad. I haven't been asked to do it but just to identify the timber. If they want me to make the hammer, I'll get back to you. Thanks again
Similar Threads
-
Does anyone know the type of timber?
By AngelaPetruzzi in forum TIMBERReplies: 1Last Post: 9th October 2012, 04:43 PM -
Timber Type Please??
By Bruce101 in forum TIMBERReplies: 3Last Post: 20th April 2009, 02:45 PM -
what type of timber is this
By TrewtoTradition in forum TIMBERReplies: 17Last Post: 24th August 2006, 01:42 PM -
What type of timber?
By pjgrandad1 in forum WOODTURNING - GENERALReplies: 3Last Post: 25th October 2002, 06:26 PM