Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Fitting Triton Dustbag
-
30th April 2014, 12:50 PM #1Novice
- Join Date
- May 2009
- Location
- Victoria
- Posts
- 23
Fitting Triton Dustbag
Hi all
I am attempting to fit my triton dustbag to my workcenter 2000 but cannot for the life of me figure it out. I think maybe I am missing some parts for this.
I am trying to follow the instructions from this PDF.
http://www.tritontools.uk.com/page91.html
Here are the pieces that I currently have:
IMAG0664.jpg
IMAG0666.jpg
IMAG0667.jpg
IMAG0668.jpg
Is this all that I need? From the instructions PDF I do not have the foam piece in figure 1 and also the black piece in figure 3.
From the front cover on the instructions PDF it looks like the bag wraps around the silver rails of the table, but how does it do this? Also in my 4th picture, what are the velcro openings for in each corner?
Sorry if this post if confusing, I've just spent a couple of hours trying to figure this one out, thought I'd ask you trusty lot on this great site
Edit: Sorry about the attached image at the bottom, don't know how to remove it.
Cheers
Joe
-
30th April 2014 12:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st May 2014, 10:59 AM #2GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,301
You don't appear to have the lower section of the kit, the dust bag which attaches to the circular ring on the upper part shown in your first photo. We also need to see a photo of the other side (the top) of the grey upper section in your first photo. The dust bucket isn't part of the dust bag arrangement - it's a separate dust collector that attaches to a vacuum cleaner.
regards
Chris
-
1st May 2014, 11:17 AM #3Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 420
In the first photo you have the bag upside down to how it should be on the saw. This bag should have a 'flap' that goes on top of the saw and fastens with velcro. Have a look on https://www.youtube.com/watch?v=pVPAD7U7mJQ - the video doesn't show how to put the dust collection bag on, at least it shows how it looks when assembled.
Do you have this manual? http://www.carbatec.com.au/pdf/manua...0Instructs.pdf
-
1st May 2014, 02:54 PM #4
Hi,
There are 2 versions of the dust collector, at a wild guess you could be trying to fit one with the instructions for the other. The older one had a funnel that connected to the dust bucket ( that is why it has 2 inlets) the later one has it's own bag and only the blade guard connects to the bucket.
Good luck with itHugh
Enough is enough, more than enough is too much.
-
8th May 2014, 11:44 AM #5Novice
- Join Date
- May 2009
- Location
- Victoria
- Posts
- 23
Yeah I dont have that top section from the youtube video, the black piece that seems to go right across the saw chassis. This has to be the piece I am missing. Though looking at mine, the top of it is more like a drawstring, not velcro.
Here is a photo of the top section.
IMAG0713.jpg
-
19th November 2018, 02:33 PM #6New Member
- Join Date
- Nov 2018
- Location
- Safety bay
- Age
- 74
- Posts
- 6
I have exactly the same problem. I've just bought a 2nd hand one that has never been used and I only have the parts you have. Did you ever get yours fitted cos I'm totally confused and there doesn't appear to be any helpful instructions for idiots like me.
Cheers Rob
-
20th November 2018, 08:35 AM #7Novice
- Join Date
- May 2009
- Location
- Victoria
- Posts
- 23
-
22nd November 2018, 11:09 AM #8New Member
- Join Date
- Nov 2018
- Location
- Safety bay
- Age
- 74
- Posts
- 6
Dust bag
I've realised since my reply that there are two types of dust bags. I of course have bought the wrong one.dust bag.jpg This is the bag I have and it's not the right one for my Triton (Different type of table). You may be in the same predicament. they sell for about $118 on eBay from the UK. I've put mine on Gumtree for $60.
Regards Rob
-
14th January 2019, 06:55 PM #9New Member
- Join Date
- Nov 2018
- Location
- Safety bay
- Age
- 74
- Posts
- 6
It's not for the work bench we have it's for the smaller saw bench.
Similar Threads
-
Wanted: Triton DCA250 Dustbag for Workcentre 2000
By jcostab in forum TRITON / GMCReplies: 5Last Post: 6th June 2020, 05:06 PM -
Fitting a Dewalt DW621 to a Triton MK3?
By Ozcelt in forum ROUTING FORUMReplies: 0Last Post: 2nd April 2011, 07:54 AM -
Fitting Triton 184mm Saw to WC2000
By Triton User in forum TRITON / GMCReplies: 5Last Post: 14th January 2008, 11:25 PM -
Help with fitting a Triton Router for crossrouting
By strider01 in forum TRITON / GMCReplies: 10Last Post: 16th July 2007, 01:32 AM -
World's cheapest Triton dustbag - The dust box WIP
By toddles in forum TRITON / GMCReplies: 3Last Post: 28th May 2007, 10:45 AM