Thread: Self-Adhesive Scale Pointer Labels

If you are going to keep the fence on the left (as you swore to do in your other post) you don't need these!!

The fence has the scales.

The front and back channels have the fixed pointer.

The fixed pointer has rubbed off just like the fence scales.

Carbatec have self adhesive rules, but whether they are suitable I cannot say.

I don't know if it helps but I have found mine which I'm sticking on over the weekend, so I can scan and you may be able to print them off. They're just a silver label so hopefully you can buy the label and print it off.

You can get them here:
Tool Spares Online. Search

rocks!

A scan would be brilliant!

Originally Posted by Chrism3

You can get them here:
Tool Spares Online. Search

Champion!

Thanks Chris!

LOL
I actually emailed them with the "Can't find the part you're looking for let us know".
They replied if its not on the list then we don't have it.
LOL

I was sitting down to write to Ron Paulk about accuracy.
To see if I'm expecting too much.
As I'm targeting zero variance in my cuts and getting .5 to 1mm variations.
Spending a lot of time an money where its more than likely my experience and ability (translated to lack of experience and inability).



These should help.

And it just completely crushes my heart to see how bad the AUS$ is.

Just use a steel rule to set the fence. I had a triton for years and found that by ignoring the scales and using a steel rule and a zero clearance overlay on the table I could get 3mm veneers 50mm wide no drama. I used to make miles of the stuff.

Cheers
Bevan

you should be able to get to within 0.5mm accuracy, because the printed scale pointers show you 0.5mm. (se page 11 of the manual)

Blast! Just recalled tipping it over pushing it out of the garage instead of pulling it out.

get the wheels man.

it was on the wheels I was trying to push it over a slight pump and the legs folded in.

I was just now thinking about how to build some support to keep the table legs wide apart and get a shelf for the dust bag at the same time.