Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: triton router table
-
22nd December 2006, 09:30 AM #1New Member
- Join Date
- Dec 2006
- Location
- isle of wight, england
- Posts
- 3
triton router table
hi everyone im eric from uk can you give me your advice and experiences on the router table attachment any pitfalls,also will my dewalt 625 ek be suitable for the table thanks
-
22nd December 2006 09:30 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd December 2006, 10:25 AM #2GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
Eric,
Most routers will fit to the router table, I had a look at one of these on the net and it should fit. There are exceptions but I doubt if these is one of those.
-
22nd December 2006, 07:30 PM #3
I don't think the Triton Router table is one of Triton's best efforts. there are too many different sections in the table, all needing to be joined together without slight bumps. The problem is, they have them.
I haven't found one Triton router table to be absolutely flat all the way across and this has forced some Tritoneers to make mods by adding sheets of aluminium to the tops to make it all flat. Hardly something which should be necessary.
Many of us Triton guys down here have upgraded to a better top.
Either make your own with some mdf and/or melamine or buy something better.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
23rd December 2006, 08:06 AM #4
Gumby has summarised it very well... I remember when I first started with routers about 5 years ago, I built a table out of coated melamine with several differenrt fences for different jobs. The top was perfectly flat and allowed for very effective jointing with a long straight bit as well as accurate cutting of tenons.
A couple of years later when the table started falling apart I got the triton table with stand thinking that I would save myself the time of building one. Bad mistake, several hours of filing, adjusting, etc the table is still not perfectly flat.
It does have some great accessories such as the biscuit jointer which I have used extensively when making my work bench, the finger jointer (some woodies like this, I personally find it a pain), also the switch for turning the router on/off is a great idea.
I think the Triton table is more than adequate for most jobs but once you start demanding accuracy it starts becoming a headache. I think the ideas behind a lot of the features are very clever, but do not always work very well in a table-top made from pressed metal.
Having said that, lots of people modify the table with great results and woodpeckers here in Australia are selling a replacement table top. You could argue however adding it all up (table, stand, new table top) that you are better off getting a different setup.
I hope that has helped.
Have a Great Xmas.You can never have enough planes, that is why Mr Stanley invented the 1/2s
-
23rd December 2006, 09:41 AM #5I have got the Triton Router Table. Its 'decent', but only just. I forget how much the router table and the stand cost me, but I would say it would be getting close to some of the much better table tops and accessories you can buy from somewhere like Woodpeckers.
If I had my time again (or probably when I upgrade), I would go for something like this package here.
My reasoning is that mainly the top of the Triton table and its inserts is not flat, which caused me a large headache. Have a look at my post here (this post has a link to my original headache). That's my main gripe with the otherwise pretty good product. Why pay that many $$$ for a product that doesn't do the job right?
There are other good things on the table, the easily adjustable fences (in 3 directions - easy to turn it into a jointer), the fence can be moved in 0.1mm increments, and the included dust extraction works pretty well (but I guess thats with all tables).
From my experience, I would look at the prices of other products (which also use T-Track making it alot easier to make and use jigs), or if you can get a router table 2nd hand for a decent price, make the aluminium top that I did.
Cheers,
Nathan.
-
23rd December 2006, 05:11 PM #6GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
-
23rd December 2006, 08:37 PM #7Member
- Join Date
- Jun 2004
- Location
- Hamilton, New Zealand
- Age
- 87
- Posts
- 68
For me, at the time, buying the Triton router table and router, was the right thing to do. I had no experience, and didn't know anyone who could advise, except for the various suppliers.
Now that I have had the experience of the Triton, I still think it has features I would never have had the time to build in if I had tried to build my own table as has been suggested (for example the shims for use as a jointer) but I can see the shortcomings and adapt to them. I can just envisage a home built table, half finished - full of good intentions but too many other jobs to do to finish it - and making do for another 6 months!!).
I think that the Triton router is too big and heavy for some of what I do, and yet the power is marvellous when I need it.
Look back through various postings (using search).
If you get the Triton, there is a trap in the way the little red tabs/ lugs are set up under the table to hold the router mounting - its a trap for the unwary, and alters the level of the table top. I posted some close up photos about it a year or more ago.
Cheers, and Christmas wishes
ROB NZ
-
23rd December 2006, 10:03 PM #8
-
24th December 2006, 10:52 AM #9GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
Don't buy the table and special order the fence from Triton or make one that suits your needs.
Or buy the knobs and bolts that Triton use or similar ones from your local hardware with wings nuts for easy adjustments to secure a fence you make yourself.
-
30th December 2006, 07:02 PM #10Novice
- Join Date
- Jul 2005
- Location
- Townsville
- Posts
- 15
Who is Woodpeckers?
Who is Woodpeckers and where in Australia are they? Does there top fit the triton Mk3 sawbench?
Can i fit the triton jigsaw attachment to this top and there other accessories if i get around to buying them?
-
1st January 2007, 06:28 PM #11
www.woodworksupplies.com.au
No, the top from Woodwork supplies will not take the usual Triton attachments, but it's a much better router table top the the Triton one.
I have mine screwed to a Triton router table stand and that works fine.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
Similar Threads
-
Modifying the Triton Router Table top height
By Ian Smith in forum TRITON / GMCReplies: 15Last Post: 14th October 2011, 07:24 PM -
Attching Triton Router to an Vermont American Industrial Router Table
By johanf in forum TRITON / GMCReplies: 4Last Post: 6th June 2005, 11:14 AM -
F S Triton Router + Router Table
By Gwhat in forum TRITON / GMCReplies: 1Last Post: 19th September 2004, 08:56 AM -
Over head Router over head height winding for Triton router table?
By Maxi in forum TRITON / GMCReplies: 5Last Post: 5th November 2002, 09:09 AM