Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Triton router table problems
-
6th June 2003, 11:32 AM #1Member
- Join Date
- Sep 2002
- Location
- Central Victoria, Australia
- Posts
- 55
Triton router table problems
I have Triton router table fitted with Triton router. After doing small pieces I have decided to step up to raised panel doors.
After running a number of test pieces and not getting decent results I started to look at the table and not at my ineptitude.
On placing a 1 metre steel ruler along the face of the fence I notice there is a great deal of gaps over the length of the router table top.
Has anyone else experienced this problem and if so what are the possible solutions
Regards
AshLast edited by AshleyM; 6th June 2003 at 12:30 PM.
-
6th June 2003 11:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th June 2003, 10:02 AM #2Member
- Join Date
- Sep 2002
- Location
- Central Victoria, Australia
- Posts
- 55
No BB replies - Problem solved
Since receiving no replies on bulletin board I have spoken to Triton service department.
They are sending me a replacement table insert in mail today. Also sending me a few other bits that I was looking for to make up some jigs etc.
Customer service at Triton is so good words fail me. Good on you Triton. No wonder you have so many loyal customers.
-
11th June 2003, 06:01 PM #3Banned
- Join Date
- Mar 2003
- Location
- x
- Posts
- 590
Triton's service and responsiveness is excellent, no doubt. I worry, though, that it is because they get so much practice at it.