Thread: Triton template guides

Kincrome Tools was recently appointed the Australian distributor for Triton products. See the following web site for a contact telepone number:

http://www.tritontools.com/Stockists.aspx?Address=

Or, use the "Contact Us" facility shown at the top of above web site.

HTH
Mike

If you can't find a local source, you can get a set here. They do ship to Oz. In case you're not aware, these bushes are Imperial not Metric.

Outside Diameter : 5/16,3/8,7/16,1/2,5/8,51/64,21/32
Inside Diameter : 1/4,9/32,11/32,13/32,17/32,5/8,3/4

You might be as well getting a universal sub-base and a metric set from Trend.

Ray

Thanks for your reply Ekim.

I have an idea that Carba-Tec may be the only outlet for Triton tools at the moment. However I can use the email contact on this site to see what I can find out.

Ian

Thanks for that Rayintheuk.

I was persuaded to buy some nonstandard guides and a base plate. Unfortunately I did not check everything before I tried to use them. The chuck of the router touched the guide, heated it up, a melted a hole in the base plate.

The guides you have pointed out are described as suitable for my router and so I shouldn't have that problem again.

Ian

Cheap Tools in Bairnsdale sell the Triton router template kits. They also have an eBay store.

TRITON TEMPLATE / WINDER / DUST KIT SUIT 1400w ROUTER | eBay

Of course Triton made/make several different model routers, this one is for the 1400W model, you don't specify which model Triton router you have.

Stock of the Triton Template Guides has just arrived in Port in Melbourne.
My suggestion is to go back to Carba-Tec and place a back order and they should be able to supply you in the next week or two when logistics are sorted out. I cant speak on behalf of Carba-Tec but they supply back orders very promptly when they receive stock. When you speak to Carba-Tec ask for Doug in spares.

Thanks for the advice fellas, unfortunately too late.

I couldn't find the templates on ebay this morning. Carba- Tec told me they wouldn't be getting any more.

Now I have ordered a kit from the UK. I will have to be patient as I elected to have it sent surface mail. (The other two methods available cost almost as much as the kit itself).

Even though I could have got it earlier had I known before where to get it; at least getting it from the UK is cheaper.( Although I would have preferred to support a Aussie business).