Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Bushranger Blades
-
27th August 2004, 05:02 PM #1New Member
- Join Date
- Aug 2004
- Location
- castlemaine
- Posts
- 2
Bushranger Blades
Hi everyone , This post is to let all woodworkers know about the Bush ranger Blades range of hand plane irons , i have been producing the irons for a couple of years now and selling them through a wholesaler but have decide to push a little harder and increase awareness of the product . Bush Ranger Blades are made of the highest qaulity high carbon high chromium german tool steel wash ground and laser cut, heat treated to 57 Rc and vacuum quenched for optimum results,the irons are available to suit stanley and record patterns to suit both block and bench planes , Rabbet plane irons are on the way.other patterns can be made to order if required ,These irons are capable of producing out standing results will take a super fine edge and will last for years. if you would like to know more please post me a private message and i will answer your queries asap
-
27th August 2004 05:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th August 2004, 10:39 PM #2SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Lakehaven, NSW, Australia
- Age
- 57
- Posts
- 995
I'm sure there's a few of us at least interested. How about posting some pics? Do you have a web site set up? You're selling direct now then?
The Australian Woodworkers Database - over 3,500 Aussie Woods listed: http://www.aussiewoods.info/
My Site: http://www.aussiewoods.info/darryl/
-
28th August 2004, 01:50 AM #3
Trebuchet
I would be interested in
(1) the availability of blades for block planes, especially the Stanley #65/18, bench planes, such as the #3 through 8, and shoulder planes, such as the Stanley #9X series.
(2) the blade thickness (of the above).
(3) Prices for all, including shipping costs to the various centres.
You can always send me a PM (private message) if this is deemed inappropriate on this forum.
Regards from Perth
Derek
-
28th August 2004, 07:49 AM #4Originally Posted by derekcohen
P
-
28th August 2004, 09:21 AM #5Originally Posted by bitingmidge
me too
-
28th August 2004, 12:40 PM #6
Me three, as per P.M. Bench plane selection like Darryl,Derek,Midge,Joe, particularly interested in gauge and hardness factors.
Bruce C.Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
28th August 2004, 01:46 PM #7Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 47
- Posts
- 1,260
By the looks from the responses so far (& I assume you have had many more PM's) it might be worthwhile posting a bit more info here for all to see as some regulars only lurk in the background.
Cheers!
-
28th August 2004, 04:48 PM #8
I'm not lurking. Just keeping an eye on you guys, and yes, I wouldn't mind seeing a price list...
-
28th August 2004, 06:17 PM #9
I never lurk, although I have been known to skulk.
Time to come clean, and let everyone in on the act. Seems as if the Gods have given approval.Boring signature time again!
-
29th August 2004, 01:19 AM #10Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Yep!
-
1st September 2004, 10:49 AM #11New Member
- Join Date
- Aug 2004
- Location
- castlemaine
- Posts
- 2
Bushranger Blades Price's
Hi Guys
Thanks for the interest in Bushranger Blades,info and prices as follows. at the moment i have 4 Iron Patterns available ,
Pattern 01 , small Blocck Plane Iron, 4.5"x 1 5/8"
Pattern 03 , small Bench Plane Iron, 7 3/16" x 1 3/4"
Pattern 04 , Medium Bench Plane Iron, 7 3/16" x 2"
pattern 06 , Large Bench Plane Iron, 7 7/8" x 2 3/8"
Pattern 01 , $ 59.95
Patterns 03,04,06 $69.95
Price includes GST Post and Pack per 1 Blade , postage may change
depending on the number of Blades orderd ,there is a discount of 10%for
orders of 3 or more Blades ,payment can be made by cheque or cod Cheques
should be made out to forest creek antique restoration.enquiries from
retailers and wholesalers are welcome.either email me or send a private mail
All Irons are made from highest Quality German Tool Steel ,wash ground to 2.6 mm in thickness (1mm thicker than stadard ) to eliminate chatter when planeing difficult timbers,they are laser cut to ensure dimensional accuracy ,the Irons are then heat treated and vacuum quenched to 57 Rc givig a vey hard extremly tough edge that will once set and honed will give outstanding performance wih minimal re sharpening needed i have no doubt that Buhranger Blades are as good as any ever Produced !, a big statement i know but i made them and i have been using them for 4 years and would not consider changing brands,bushranger blades are made in Castlemine vic so buy australian!
cheers Peter.