Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Clamps
-
6th January 2010, 10:32 AM #1
Clamps
Picked up 4 x 300mm F clamps $5 each the orange & black plastic quick release type. and a 2x 4.5m tie ratchet downs $9.50 each yesterday at The Reject Shop Macarthur Square
-
6th January 2010 10:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th January 2010, 01:34 PM #2Member
- Join Date
- Mar 2004
- Location
- Montville
- Posts
- 83
Go easy with them. I had a set of similar clamps and without exception the lower grip broke when I tried to apply a lot of pressure.
Cheers,
Dan
-
7th January 2010, 12:45 AM #3
What he said, depending on Dan's definition of "lower." The hinge pins (handle) are nothing to crow about either. I've replaced some with machine screws.
Yellow and black are more robust.
On the plus side for this style, the small jaw can be moved to the other end of the bar for expansion mode, if needed.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
7th January 2010, 07:31 AM #4
Thanks gents already knew about handle breaking but the preasure being used at the time was over the top so my own fault.
So I have one to repair from a 600mm set going to make a Jarrah handle . Otherwise not bad for the price.
-
7th January 2010, 02:25 PM #5Member
- Join Date
- Mar 2004
- Location
- Montville
- Posts
- 83
If you dont mind, I would be interested in seeing your repair of the broken handle when you do it.
I may be able resurrect a few of my broken ones.
Cheers,
Dan
-
7th January 2010, 02:48 PM #6
Similar Threads
-
clamps
By Sokolic in forum WOODWORK - GENERALReplies: 4Last Post: 23rd September 2007, 12:50 PM -
Sash clamps versus Bessey K series clamps
By zelk in forum HINTS & TIPSReplies: 8Last Post: 6th September 2007, 10:24 PM -
Use for clamps
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 28Last Post: 27th March 2007, 11:30 PM -
f clamps
By Zed in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 2nd November 2005, 09:18 AM -
which brand g-clamps and sash clamps??
By TimberNut in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 20th September 2005, 05:44 PM