Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
31st December 2023, 01:29 PM #1Senior Member
- Join Date
- Nov 2020
- Location
- Oregon, USA
- Posts
- 234
The fitscheneisen: a German fitting chisel for fiche hinges
Here is tool entirely new to me used to install a hinge style that is entirely new to me. I guess I need to get out more.
fitscheneisen.jpg
A friend of mine was showing me a couple of these odd chisels from his collection and was trying to explain for what and how they were used. But since I didn't know what the hinge looked like or how it was installed his hand waving made no sense. Then he sent me this link to a video by a German furniture restorer and all became clear. The style of hinge is apparently used for furniture as well as windows and doors.
And how they are used. The teeth on the underside of the chisel remove chips made when tapping the mortice chisel into its narrow mortice. Very clever. I don't know whether such chisels are made any more.
https://www.youtube.com/watch?v=3cQaLbYRjD4
And other methods of installing what White Chapel call fiche hinges.
Fiche Hinges
-
31st December 2023 01:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st December 2023, 03:47 PM #2
Guess I don't get out enough either. Never seen one before but always good to see how things are done.
Regards
John
-
31st December 2023, 11:34 PM #3SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
Interesting!
I've never seen such a chisel. I bit like a hollow chisel mortiser except the waste is shredded by those ridges on the chisel rather than shredded by an auger bit.
-
13th January 2024, 12:20 AM #4Senior Member
- Join Date
- Feb 2023
- Location
- Perth
- Posts
- 392
Earlier this tear I pit up a post, where I used cut down srcaper blades to make vertical slots each side of a mortise parallel to the grain, with holes at each. Then its easy to pry out the block between the two holes,
These fitscheneisen look perfect for the job.
ps - I notice that Narex makes a version.
Thanks
-
13th January 2024, 12:29 AM #5Senior Member
- Join Date
- Feb 2023
- Location
- Perth
- Posts
- 392
one current source of these mortising chisels..Kirschen 1720150 Plugging Chisel, Black/Grey, 1.5 mm : Amazon.com.au: Home Improvement
Similar Threads
-
Fitting Hinges
By Rick47 in forum BOX MAKINGReplies: 6Last Post: 1st October 2023, 08:59 AM -
fitting hinges
By dave_c in forum WOODWORK - GENERALReplies: 2Last Post: 2nd March 2016, 04:38 PM -
Hinges - the secret to fitting them
By Dod in forum WOODWORK - GENERALReplies: 20Last Post: 11th March 2003, 03:26 PM -
fitting hinges
By Arthur Alchin in forum WOODWORK - GENERALReplies: 7Last Post: 28th June 2002, 10:21 PM -
Hinges - fitting them
By Dod in forum WOODWORK - GENERALReplies: 4Last Post: 23rd July 2001, 08:26 PM