Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Groz low angle planer
-
11th February 2007, 08:18 AM #1
Groz low angle planer
Was in Carbatec yesterday and decided I might buy one of these to practice my fettling skills before getting a decent unit, ferretarse or LN.
Anyway, pull it all to pieces and looks like a straightforward job until we adjust the front sole, the damned thing sits at an angle when closed up, too much to sand away and when opened up sits at an opposing angle.
I think it could be a return trip for something a bit more accurate, I know it is a cheap plane but I did expect something a little better than this.
Anyone else suffered with these planes or did I just get unlucky? I will see what Carbatec have to say next week when it goes back.Stupidity kills. Absolute stupidity kills absolutely.
-
11th February 2007 08:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th February 2007, 08:33 AM #2
Groz do not have much of a reputation - other than for some VERY ordinary kit...
-
11th February 2007, 08:41 AM #3Member
- Join Date
- Jul 2006
- Location
- Australia
- Posts
- 64
I just got on to the forum this morning to ask if these planes were worth it. Guess I'll keep looking for an old Stanley or something.
-
11th February 2007, 08:47 AM #4Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
As soon as I can get some spare cash, Ill get one of theses, they seem to be the better of the all rounders.
http://www.carbatec.com.au/store/ind...=130_6920_6930
Al
-
23rd February 2007, 06:42 PM #5
Took the beastie back a week or so ago, no problems, now the proud new father of a Veritas low angle plane
Stupidity kills. Absolute stupidity kills absolutely.
-
23rd February 2007, 06:45 PM #6Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
-
23rd February 2007, 06:57 PM #7
Been so busy at work and totally shagged when I get home haven't had a chance for a drive, may get a go at the weekend...I hope.
Edit::: It's Mr Prick thankyou.Stupidity kills. Absolute stupidity kills absolutely.
-
23rd February 2007, 10:10 PM #8
Re groz
Groz is made in India.
If there is anything mechanical item made well from there, I for one would love toknow about it. That will be a first .I once owned a P.O.S. Tata Telcoline.
None of them have heard of the words like quality control, quality, assurance ,build quality or customer satisfaction.
Chinese over indian any day, and he gets a Veritas.
Lucky Plick.
Grahame
-
24th February 2007, 12:43 AM #9
-
24th February 2007, 12:51 AM #10
Which is better, the LN or Veritas Low angle plane?
If you never made a mistake, you never made anything!
-
24th February 2007, 01:32 AM #11
Personal aesthetics seems to be the common divider of opinion. Veritas is heaver, and has more whizz-bang knobs, adjusters and features then you can poke a stick at, plus a few dollars cheaper. If new, modern, and cutting edge, technology is your thing for better or worse then veritas is your brand.
However if you prefer the simple way, like the use of brass in aesthetics of the LN, I enjoy the simplicity of a LN, I find whizz-bang knobs and adjusters to be more a root of concern then a feature. LN may not be whizz-bang but it is defiantly tried and tested in terms of design.
I used to back Veritas, and had no interest in LN tools then I picked up a LN block plane, at the woodworking show, and their was something right about the world at that moment that I just do not get from a Veritas tool.
-
24th February 2007, 12:28 PM #12
I should add that I did pay the difference, not a straight swap, also got a patio heater that they had and never used for $100.oo
They had a few bits out the front on sale, scratched or minor dents etc for what seemed reasonable prices.
If SWMBO leaves me alone I might get a chance to sleaze out thisarvo and give it a run.Stupidity kills. Absolute stupidity kills absolutely.
-
24th February 2007, 06:56 PM #13
I luvs ya Iain
Was just about to buy one, I asssumed it was made in Eastern Europe by the name. Had an awful experience with an Indian plane, but got some chisels that are great.
Not only did you save me the $50, but the trip out to Carbatech and the probable blue to return it.Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
24th February 2007, 11:49 PM #14
You won't have a blue at carbatec over a return. not in my experience anyhow.
By the way what are the record low angle block planes like?ray c
dunno what's more fun, buyin' the tools or usin' em'
-
25th February 2007, 09:21 AM #15
Had a bit of a play yesterday on a piece of scrap Tas Oak, without having sharpened it yet it took some beautiful paper thin shaving off the length of the timber, with the mouth wide open.
Tried the end grain without adjusting and it tore it to pieces, closed the mouth and started to remove fine shavings again, tore out the end though as I couldn't fit a sacrificial block due to the vice racking (I know I can fix it but I didn't).
Adjustments are simple, easy and very precise, I just need to adjust the two set screws on the side to locate the blade, but like any kid with a new toy, had to have a play first.
No blade chatter and fits nicely in my massive paw, plenty of weight to get it through without having to force it down.
No blues with Carbatec either, they saw the problem and just took it back, only concern was they said they had a bloke who will probably buy it as they were now out of stock and he wanted one.Stupidity kills. Absolute stupidity kills absolutely.
Similar Threads
-
Low angle vs. High angle Planing
By silentC in forum HAND TOOLS - UNPOWEREDReplies: 68Last Post: 1st November 2006, 03:56 PM -
Spokeshaves - Low Angle or not low angle, that is the question
By Slavo in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 6th June 2005, 09:36 AM -
Stanley #62 (low angle jack) renovation (long)
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 27Last Post: 3rd March 2005, 04:42 PM -
Low Angle vs Standard Block Planes
By Roberto Perez F in forum WOODWORK - GENERALReplies: 3Last Post: 18th September 2004, 07:23 PM -
Veritas Low Angle Jack Plane
By GregLee in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 19th August 2004, 10:50 PM