Needs Pictures: 0
Results 16 to 30 of 30
Thread: Lie-Nielsen price rise?
-
25th July 2022, 08:36 PM #16
Yes, I agree.
Thanks for the cost comparison Ian, although I know a lot of people who are not earning that listed average.
The Lie Nielsen isn't priced with them in mind - rather it is aimed at the well off hobbyist whose disposable income will cover it.
At that price it is hard to see value in the saw - especially when the Lee Valley version is so much cheaper, and as you have said - there are plenty of Tyzacks, Spear and Jacksons and Disstons available for a fraction of the cost.
Cheers
Tom.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
25th July 2022 08:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th July 2022, 09:08 PM #17GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 65
- Posts
- 1,278
I thought 90000 feels high for an average wage, but then it isn't because all the millionaires pull the average up. The median wage is actually only 1200 per week or 62400 a year.
-
25th July 2022, 09:13 PM #18
Indeed, Tom, my eyebrows went up a bit when I read that figure, but remember its an average, which is inflated by people who
earntake home way more than is reasonable. I was going to take an arbitrary figure of $50,000, which would bring the cost of the LN to 34% of the weekly wage, just a tad more than the relative cost of the Tyzack in 1920.
My message was meant to be that things haven't changed as much as we are sometimes inclined to think they have....
IanIW
-
26th July 2022, 09:08 AM #19Senior Member
- Join Date
- Aug 2016
- Location
- Hervey Bay
- Age
- 46
- Posts
- 230
Yeah I think the Lie Nielsen stuff is not unreasonable considering the quality and where it's produced.
I've seen various comparisons with the cost of Stanley planes from 100+ years ago and the LN products are always very similar or less expensive that the Stanleys were originally.
The current price rises were probably way over due, the #4 plane had been the same price for 10years (in the US). Adding in all the current factors, rampant US inflation, shipping costs, material increases etc.
-
27th July 2022, 04:48 AM #20GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 3,136
you may want to use median income, though the median income in the US is probably about the same thing converted (I think australia after currency adjustment is only slightly lower than the US).
Mean is an "extrema sensitive" statistic.
I sometimes trot out this whole idea that planes are not far off by pulling up the wards catalogue (probably did it here) and pricing the planes, which would have been sold at retail back then - no "deals", and then comparing the plane prices to the census bureau's collection of union wages by city, which is unbelievably robust given the time. I guess they wanted to see what was going on and we all luck out based on that.
A large stanley plane will be in the ballpark of a day's wage for a skilled tradesman, and more than a non-union skilled tradesman would've made outside of the city.
Comparing a day's wage is a good way to do it vs. just inflation, though nothing is perfect. People had less disposable income so just having a disposable day's wage back then would've been a taller order than it is now. As I recall, the typical citizen in the US didn't have the kind of disposable income that we enjoy right now until the last couple of decades. Everyone likes to remember the 80s in the US as a sort of simpler time - plenty of entertainment, but no internet, but even at that point, the disposable income was only better than it had been - nothing like it is now on average.
Long story short, for the average person, it's similar in a day's wage, but having that money spare is easier now.....if we can keep it away from eating out 3 times a week and having four people in one house on cellphones with unlimited data, and $250 a month on air conditioning, etc.
-
27th July 2022, 04:53 AM #21GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 3,136
here is a page that well illustrates the whole disposable income. This is "real" (inflation adjusted already) from 1960 to now.
I grew up in the late 70s through the early 1990s. I can, of course, remember some big spenders back then, but through that period, real disposable income was about half of what it is now on average, and thinking about peoples' behavior, the spending habits reflected it.
I moved 4 hours away to an urban area and just assumed that "people don't save here like they did at home" only to travel home now and see that they don't there, either - or that's my perception because people of relatively average means will have a house, two cars, take a vacation at least once a year and have all kinds of stuff.
Our main TV was $775 from 1975, and 23.5" viewable back then. I remember the price because my dad told it to me often if I was kicking anything around near the TV.
My first real computer was $3400...in the mid 1990s (that's like $7k now).
We have it pretty good and sometimes we have trouble admitting it because we like to talk about how bad we have it. Kind of gets on my nerves because the self-pity routine was sort of frowned upon 40 years ago and it's pretty popular now. "someone else made me _____"
-------------------
In current $US, that 23.5" viewable console TV (not even real wood on the console panels) would be $4,270]
Two years ago something went wrong with our living room TV, speakers or something. So we replaced it with a 55" smart TV that was $345 delivered. effectively less than 1/10th as much.
I plugged the "dead" 40" TV in in my semifinished basement and it seems fine (not sure what the mrs. was after saying something was wrong with it) and it is now 12 years old. No serviceman/woman or even servicecis has ever needed to see it.
-
4th August 2022, 09:19 PM #22Senior Member
- Join Date
- Aug 2016
- Location
- Hervey Bay
- Age
- 46
- Posts
- 230
I wish I'd bought a shooting plane when they were available a few years ago.
The new price for when they come back into stock is a bit eye-watering.
No. 51 Shoot Board Plane - Right Handed
-
4th August 2022, 10:34 PM #23
-
4th August 2022, 11:39 PM #24GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 3,136
Those are up to $650 plus sales tax here. Kind of a big figure for a plane that really doesn't have historical precedent for being used on more than small bits and little miters.
The older texts that i read often provide methods to deal with little careful work and striking narrow edges (length) for gluing, but they are devoid of shooting anything of size and for a reason - you can handle planing anything bigger in the vise any number of ways and get much more edge life out of a plane.
I made a big skew infill shooter that's better working than anything LN or LV makes, and I still can't ever figure out where it would be useful. It was fun to make and it works great, but I don't make small things and work like ends of drawer sides is done better by marking and planing in a vise.
-
4th August 2022, 11:44 PM #25Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
5th August 2022, 07:54 AM #26
-
5th August 2022, 08:07 AM #27GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 3,136
I may be beating a dead horse, I can't remember if this is the thread where I shared the comment about actual disposable income.
WE make assumptions about hidden variables when we compare even incomes. One of those is that the distribution of what we have to spend is the same - or that free money that could even be considered for spending on something like an LN plane is proportionally the same.
In this case, it isn't (thanks to productivity). So if the tyzack buyer would have to spend .25 of a week instead of .34, if they had a burning urge, it would've been harder to scrape that together because of all of the things fighting for the other 0.75.
in the guitaring hobby, people can sometimes now (I've sold guitars to some of these folks) be of relatively normal means and have amassed 50-100 guitars because they can't stop buying.
I sold a guitar to an audio technician (in the music industry) earlier this year and he asked what else I had. I showed him a yamaha SBG3000 as he'd spotted it on *my* purchases and I told him it was a nice guitar, kind of expensive for what it is, but I wasn't looking to sell it.
And then he said "just checking" and showed me a picture of three on his wall already. !!
In the 1950s, these things go like "a dentist purchased two guitars for himself and one never left the closet" (that's kind of the old barn find about les pauls or stratocasters).
-
5th August 2022, 09:16 AM #28
As the man "said" -
But if these things are $US650, it translates to a bit over $900 in Au dollars at current exchange rates. That's another $450 to cross the pond!
Whatever, if you really want one, you'll just hafta keep saving - it's like houses, just as you think you're getting close to a deposit, the price goes up!
I have to agree with DW that a dedicated shooting plane is a luxury that few really need to indulge in. If you own a decent tablesaw & buy a good cutoff blade (far cheaper than a LN shooter!), the need for shooting becomes minimal to non-existent for most cabinet work. I've always had a shooting board, but over the last 20 years or so I could probably count the number of times I've pulled it out on one hand. When I did, I used an ordinary bench plane, or the 62 clone I bought 10 years ago, which does slightly better, but isn't comfy to use for long sessions, I'll admit. If I ever need to do significant shooting I'll make a handle for it for sure. Wide boards like carcase sides are just as easy to trim freehand & the 62 clone is really good at that.
Of course it depends what you do most, I did use my shooting board when I was fitting out my mini tool chest:
T_box open.jpg Plane drawer.jpg
The dividers & partitions are all press-fit, I didn't want anything 'permanent' in case I need to alter the layout. Sneaking up on really tight fits with a shooting board is the go on this sort of job. But the plane I used was this little 5 1/2" thumb plane.... Adj 3.jpg
CheersIW
-
5th August 2022, 03:12 PM #29
-
5th August 2022, 09:10 PM #30Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
Similar Threads
-
Price rise
By Handyjack in forum FESTOOL FORUMReplies: 21Last Post: 6th January 2014, 11:58 AM -
Ranbuild price rise
By Arch Stanton in forum THE SHEDReplies: 29Last Post: 1st October 2013, 10:31 PM -
Steel price rise?
By Gate_Keeper in forum THE SHEDReplies: 9Last Post: 17th December 2010, 08:10 AM -
Inevitable price rise is upon us.....
By Gwhat in forum PROFESSIONAL WOODWORKERS SUPPLIESReplies: 1Last Post: 14th December 2008, 12:13 PM -
Price rise
By fenderbelly in forum WOODIES JOKESReplies: 10Last Post: 10th August 2008, 12:55 PM