Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 35
-
17th January 2009, 05:14 PM #1
Pictures of US wartime Stanley Planes? Plus tool gloat
Yesterday I said to swmbo, that I categorically have finished buying tools (for at least a week, whispered under my breath). I woke up this morning with the same intention, but read the paper and the same old-tool set was still there. I went to have a look and ended up buying the big old dovetailed toolbox. There was a #7 USA made Stanley in it that I've now dated to the last quarter of 1943 making it a type 17. It does have a black adjustment knob, but it feels more like plastic than hard rubber, does anyone have a photo of a wartime one with a black rubber knob.
There was also 3 wooden planes and a wooden rebate plane, a couple of #4's and a #4 1/2, a breast drill and a handdrill, a small brace and augers, a diston dovetail saw and a couple of panel saws, mathieson and titan chisels, dreadnaught files, yankee screwdriver, old tape measure, a couple of lathe tools, a rabone spirit level, ? what else. Oh a bunch of old stilsons, af ringspanner sets, hammer, power drill and angle grinder.
I forgot, 2 metal spokeshaves, 2 wooden spokeshaves, a Record #71 and a Stanley #78 sans fence. And a Stanley 60 1/2 and f-clamps...
Cheers
Michael
-
17th January 2009 05:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th January 2009, 06:02 PM #2
I'll have to post my pics on what I picked up today, a little Stihl MS180C chainsaw and odds and sodsPat
Work is a necessary evil to be avoided. Mark Twain
-
17th January 2009, 06:03 PM #3
Other than letting you know that the Diston dovetail saw is no good and you should send it to me for inspection and testing over a suitable time frame of say 20 years I would think you have done rather well.
Of interest Michael, many I am sure would like to know if you have any tools in the chest you did not have before? It might be a chance to round off the great plane blade order buy grabbing three new blades for those planes of yours.
I'm certain that who ever owned it before would be pleased to know his gear is going to someone who will put it to good use.
-
17th January 2009, 08:13 PM #4
Photos here Pat.
John, unfortunately the Disston needs a lot of work, you wouldn't want it
Now, about your question on tool duplication, I refuse to answer on the grounds it may incriminate me. Actually, not many I had.
The Saw in the middle, an Atkins rip saw is beyond hope I think. The ring spanners are Brittool brand. Never used wooden spokeshaves before, don't know if these are any good. The Stanley #7 is the pick althought the 60 1/2 is in vgc. The little german smoother is also good. The 2 #4 have plastic totes, the 4 1/2 is a good user, but the 2 bigger wood planes are beyond help and will probably become objects d'art. The drills and brace are all good users. Chisels are a mix of Swan, Marples and Mathieson, all good, Sorby is just about worn out. The Record 71 will be a good user.
-
17th January 2009, 09:35 PM #5
Here's the mix of other tools. And I have a question about the end of the Disston panel saw. Why does it have the strange shaped end seen in photo 1?
Cheers
Michael
-
17th January 2009, 09:44 PM #6
Wooooohaaaaay.. Nothing is as much fun as dragging home a big box of tools.
And what a box, the 7 should be very nice,I have a 3 of the same vintage and find it very good, thick castings, accurate machining good blade.
There looks to be a couple of nice Socket chisels in there (which one is the swan?)
Two beautiful Disstons.. ooooeeeer a very nice haul indeed.
Gloat of the week I reckon
Considering your first comment.. how the hell did you sneak it past swmbo?Last edited by Slow6; 17th January 2009 at 09:45 PM. Reason: un-spell
Best regards, Luban
-
17th January 2009, 09:48 PM #7
-
17th January 2009, 09:51 PM #8Senior Member
- Join Date
- Jun 2005
- Location
- Planet Earth
- Posts
- 477
You will love the wooden spokeshaves!
low angle blade
low center of gravity
nice to hold
your thumbs just naturally fall in the right place
Try it tomorrow ....... you will smile.
-
17th January 2009, 10:20 PM #9
Thanks Luban for the feedback. The #7 felt very nice in the hand, one of the reasons I bought the box. I didn't have a #7. The Swan is the one with the dodgy handle next to the Stanley. Second from left is the Mathieson, the other socket chisel is a Marples. The small Disston has a split in the handle near one of the nuts.
I mentioned it was still in the paper this week and she told me I should go and look at it (Nice girl that). Last week I said to her that will be gone already ( and it was cept the fella rang back to say he didnt' want it)
OK, so that means it is an older saw?
Thanks John, well I better do that...
Cheers
Michael
-
17th January 2009, 10:46 PM #10
In my experience, yes. I'm sure a saw enthusiast will be by shortly to confirm or deny.
if you go HERE you should be able to age the saws from their medallions.
Its an eclectic tool box, it looks like a box that the owner was adding to until quite recently. The 60 1/2 is quite new with lateral adjustment (if I am seeing it right) Perhaps dad or grandpa started him off with the woodies and he's been adding to it ever since.
Hold on to that swan it will become your favorite chisel
and make swmbo breaky in bed tomorrow morningBest regards, Luban
-
17th January 2009, 10:51 PM #11SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Perth
- Posts
- 966
omg you're a poof! I'm so jealous!
Well done on the find.
-
17th January 2009, 11:17 PM #12
Thanks for that site Luban, the full size saw has an 1888-1896 medallion, the backsaw the 1896-1917 one
Cheers
Michael
-
17th January 2009, 11:19 PM #13Senior Member
- Join Date
- Aug 2007
- Location
- Perth
- Posts
- 138
Nice pick up mate - v jealous
regards
Anthony
-
17th January 2009, 11:31 PM #14
-
17th January 2009, 11:34 PM #15
I have either the same backsaw or one very similar, and find it a handy little saw. The other Diston has a lot of life left, but the Aitkins looks fine to me, a resharpen and cleanup would do it wonders. That is a very nice collection of tools, even the Plumb hammer is a good pickup, don't know what you paid for the box, but I suspect you have done rather well.
Similar Threads
-
New Tool Gloat with Potential Tool Envy
By Scribbly Gum in forum HAND TOOLS - UNPOWEREDReplies: 31Last Post: 29th May 2010, 04:20 PM -
Pictures of Stanley 45 and 55
By MICKYG in forum PHOTOGRAPHYReplies: 0Last Post: 18th October 2007, 12:00 PM -
Most pictures we see of Lie-Nielsen planes don't show a plane like this!
By Mirboo in forum HAND TOOLS - UNPOWEREDReplies: 12Last Post: 19th July 2007, 01:10 PM -
It's raining hand planes! (a little tool gloat)
By MajorPanic in forum HAND TOOLS - POWEREDReplies: 9Last Post: 20th February 2006, 10:21 AM