Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
19th April 2016, 07:16 AM #1SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Canberra
- Posts
- 566
Record 073 and Howard Adjuster Mk II
I've been thinking about grabbing a Howard Adjuster Mk II to upgrade my Record 073. The current adjuster is looking pretty ratty and is a bit loose.
Does anyone here know if the thread is the same on the Record and Lie-Nielsen shoulder planes, and would the adjuster work on a standard (non-LN) blade?
The fellow at the counter at the Canberra Working With Wood show didn't know, and emails to Henry Eckert came back with the same response.
Thanks,
Craig
-
19th April 2016 07:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th April 2016, 09:06 AM #2
Craig, apart from the thread, the other questions to be answered are, will the bearing fit in the slot of the Record, and is there the right distance between the stud & blade for the rim of the bearing to engage the slot cleanly?? Unless someone has already investigated it & knows the answer, you might have to wait 'til the next wood show & take your plane along to their stand for a trial-fit...
It's one of those simple but brilliant ideas that make you wonder why nobody ever thought of it before! I reckon it should make quite a difference to smooth operation. When I made myself a shoulder plane many years back, I used a Record blade & went to a lot of trouble to include an adjuster like the Record's, but quickly found it not worth the trouble it took to make. I'd have saved myself a whole lot of bother then & since by simply leaving it out. I'd like to try one of these Howard adjuster knobs on it, but I used a very non-standard thread on the stud, so there's no chance. Now I have the gear, I might make myself something similar one day, but it's a 'set & forget' type of tool, so the only times I remember what a pain it is, is after each sharpening, which fortunately isn't as often as for a bench plane...
Cheers,IW
-
19th April 2016, 12:14 PM #3
Your Record is likely to have a BSW thread (certainly a 55 degree thread). A Lie-Nielsen plane would have an American thread (60 degree thread). However, most BSW and UNC threads share the same tpi count, so will fit (albeit a less than perfect fit from an engineering perspective).
I note that HE have "...a 'no questions asked' 30 day return policy for full refund." So it may be worth trying one.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
19th April 2016, 03:25 PM #4New Member
- Join Date
- Dec 2013
- Location
- NSW
- Posts
- 1
Howard adjuster is 1/4" UNC.
Similar Threads
-
Howard Adjuster?
By Luke Maddux in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 7th May 2015, 08:34 PM -
Howard...been done before I know but...
By Iain in forum WOODIES JOKESReplies: 1Last Post: 14th May 2007, 01:38 AM -
Howard's Way
By Bob Willson in forum WOODIES JOKESReplies: 3Last Post: 22nd April 2006, 07:04 PM -
Howard's Way
By Bob Willson in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 1Last Post: 21st April 2006, 03:38 PM -
Robert Howard
By Barry Friedman in forum WOODTURNING - GENERALReplies: 1Last Post: 8th August 2000, 11:05 PM