Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Repainting planes
-
11th June 2004, 12:09 PM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Repainting planes
Hi. I want to repaint the bodies of several old iron stanley/record type planes. These are not collectors items, just working gear, but I still want them to look reasonably good. Can anyone tell me what they have used with success. I tried a coat of high gloss black enamel and it looks pretty tacky and I expect it will rust underneath eventually so was looking for something a bit better.
cheers
Arron
-
11th June 2004 12:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th June 2004, 12:48 PM #2
You'd be wanting some Pontypool ashphaltum Japan:
www.libertyonthehudson.com
I haven't refinished any planes so can't help you on that one.
-
11th June 2004, 01:17 PM #3
Or you can try making your own: http://home.comcast.net/~elmorain/JapanningRecipe.htm
You can get Asphaltum from here:
http://www.e-artstore.com.au/"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
11th June 2004, 06:55 PM #4SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Lakehaven, NSW, Australia
- Age
- 57
- Posts
- 995
Or if you just want to get it done quick, try Galmet black satin in a spray can - works well & looks decent.
The Australian Woodworkers Database - over 3,500 Aussie Woods listed: http://www.aussiewoods.info/
My Site: http://www.aussiewoods.info/darryl/
-
11th June 2004, 08:33 PM #5
try some of the ppc products - have a mate into auto restoration and swears by their stuff
http://www.ppc.au.com/index.htmI like cats but I couldn't eat a whole one :
-
12th June 2004, 08:01 PM #6
I've had some sucess with "GMH flat black" with light machine oil over.
As a sound man I have about a half a dozen types of black paint & GMH is always arround. It dries real quick, isn't gluggy & can be removed with thinner easily.
I cleaned my planes with thinner & a wire brush, then GMH with a little brush, let it dry then rub on some light machine oil. wipe of with a rag.
I did this before fetling the planes & it give a nice sharp line arround the machineing.
-
12th June 2004, 08:45 PM #7
Silent,
I have looked right through that art site but can't find asphaltum anywhere on it. Is it listed under another name or am I just not looking hard enough?
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.
-
12th June 2004, 10:18 PM #8
Arron
Before painting, make sure that you remove all the old paint or japanning. If you don't the old finish will stand out like a sore thumb.
I have used black single-pack epoxy paint before (in cans). Cleaned the surface well, used a compatable primer, then applied many, many thin coats, building them up until they were as thick as the original. You can tell when you have done enough as the casting pits in the iron will be smoothed over.
Take the opportunity to fettle the mouth and frog.
Regards from Perth
Derek
-
12th June 2004, 10:31 PM #9Originally Posted by DanP"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
12th June 2004, 11:56 PM #10
Thanks Silent. I'll look again. Sorry, can't hit you with green lovin'. I need to spead some around first.
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.