Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
-
22nd January 2013, 03:16 PM #1New Member
- Join Date
- Jan 2013
- Location
- new zealand
- Posts
- 6
Seeking help to identify four wood planes
I have received four wood planes as part of an estate and I would appreciate any help that you can give me in identifying them. All that I know is that they are part of a carpenter's toolkit.
20130122_162545.jpg20130122_162609.jpg20130122_162625.jpg20130122_162701.jpg
details
1) a large Bailey No. 7 plane
a "jointer"?
2) a medium sized Stanley brand plane, No 10 on the body
a "rebate" plane?
3) a small Bailey brand plane, no identifying number
4) a small wooden plane, nothing to identify it, the remains of the maker's label on the side?
I would appreciate any information about them that you can give me.
-
22nd January 2013 03:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd January 2013, 03:25 PM #2.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
22nd January 2013, 03:31 PM #3
That is a good set to be starting with.
The 7 is as you said a jointer and can also be used to flatten large boards or panels.
The 10 is a carage makers rebate and they are not so common. Can be used as a bench plane and will cut rebates too. Will be worth more than the others.
The other steel plane looks like a 4 and is usually set up as a smoother but can be used as a general purpose bench plane.
The wood plane is a German (style)jack. A general purpose plane. A pic of the underside showing the mouth and how the blade is shaped will give a clue as to how it has been used.
Regards
John
-
22nd January 2013, 06:54 PM #4SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
I thought the small Stanley was a No. 3. The number is there, right on the front edge of the plane, in the corner next to the knob, and looked like a "3" to me.
The No. 10 is also called a carriage makers rabbet plane.
The three Stanleys look like they date from somewhere between WW II and the 1960s or so.
-
22nd January 2013, 09:49 PM #5New Member
- Join Date
- Jan 2013
- Location
- new zealand
- Posts
- 6
wow
Geez you guys are fast. I was expecting to have to wait for days to get an answer (if it ever came at all). You are really on the ball. I spent ages on the internet this afternoon just to glean the bit of information that (I thought) I had.
I am glad that I came to ask the experts.
Thanks a million - really!
Just a little more background info on the tools. They originally belonged to my grandfather (a carpenter by trade) and got passed on to my father (a fitter and turner - mechanical not wood). They have now been passed on to me (a non tradesperson who barely knows which end of the hammer to hit the nail with).
I might take a few more photos tomorrow and post them here to get some information. I spent this afternoon going through the tools and tryjng to label them for future reference - it took forever. The wood planes and saws were the worst for me - a saw is a saw is a saw - trying to identify which was which was tough.
I think that I will post a few more photos of various tools to get your advice. Also, I would be grateful if you could point out any useful info (e.g. it's hard to come by, valuable, not produced anymore etc).
As far as I am ckncerned these tools are
-
22nd January 2013, 11:46 PM #6
-
23rd January 2013, 02:58 AM #7
Yup, rabbet or rebate. Also called a jack rabbet - as it's the length of a jack plane, while the shorter No.10½ is sometimes called a smooth rabbet.
I can't quite tell from the photos, but the depth adjusting wheels look to be plated steel (not brass). If that's the case then they date to the late 1960s or early 1970s.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
23rd January 2013, 04:21 AM #8SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
-
23rd January 2013, 07:33 AM #9Gatherer of rusty
planestools...
Proud member of the Wadkin Blockhead Club .
-
23rd January 2013, 09:58 AM #10
Jeez Colin, your eyes must be way better than mine (quite likely! ) but I can't read that number to save myself. To me it could as easily be a '3' as a '4'. I would have gone for a #4 like SG, because by its size relative to the tiles & comparing with the #10 in the previous frame, they seem to be about the same overall width, which would be too wide for a #3. However, I wouldn't bet even half a stubby that I was correct....
A date somewhere in the 60's to early 70's looks about right to me, the totes seem to be a mix, some are wood, but the '3/4' looks like plastik, all ok for the era, I think....
As someone else said, a very nice starter set - wish I'd had something like that when I began woodworking in earnest.
Cheers,IW
-
23rd January 2013, 10:42 PM #11Senior Member
- Join Date
- Jan 2009
- Location
- The Shire
- Posts
- 325
G'day.
your wooden plane looks one I have with a sticker still in fair nick. Mine is a Tigre brand from Czechoslovakia. Seems to be good steel. Makes a good scrub plane.
cheers,
Virg.
-
24th January 2013, 07:59 AM #12New Member
- Join Date
- Jan 2013
- Location
- new zealand
- Posts
- 6
a few more bits and pieces
As promised, a few more bits from the collection.
I think that I have suitably identified everything else but these things I am not really sure about.
You guys have saved me HOURS on the internet. Thanks for sharing your knowledge. These things are heirlooms as far as I am concerned. Not for sale, but I'd appreciate it if you can identify anything of value/importance.
I know that it is a Cheney hammer.
The saws, Disston, types of saw I'm really not sure about.
The other steel thingamajigs I have no idea about.
Thanks guys. I appreciate your help.
-
24th January 2013, 10:06 PM #13New Member
- Join Date
- Jan 2013
- Location
- new zealand
- Posts
- 6
maybe i was pushing my luck by asking about the other stuff.
just looking to identify (with some degree of certainty) the types of saw, and what the other things are.
thanks again for your information guys.
-
24th January 2013, 10:39 PM #14
For the saws google "distonian institute" you should get a hit on a site that will give you all you need, they are good saws and the little tenon saw is quite handy. The hammer is a roughy, reasonable brand but usually the claws are worn out and the face flogged to death, if not it will be quite useful. The hole saw I wouldn't worry to much about and the little guage looks quite interesting.
-
25th January 2013, 02:29 AM #15
The first saw is a D8 ... looks like a shorter panel saw ... 4 saw nuts ... 24" maybe?
The nuts are brass, so the medallion probably says "Disston * Philada" (1896-1917) or "Disston * Phila" (1918-40)
If it hasn't been sharpened away the original points-per-inch (ppi) will be stamped in the bottom corner under the handle.
The 'plastic' handled saws are Disston 95s (1935-55). You can read about them on the website jc quoted.
I haven't held one of them yet. I have seen them selling on ebay for about $90+ for fresh ones.
Your 5-1/2 point one will be a rip-saw.
The other will most likely be a 7/8/9 point crosscut saw.
The steel nuts and ordinary handle on the tenon saw roughly put it at ??? 1960s+.
It is a good, solid, simple kinda working tool.
The teeth look like they might be very fine ... are they more than 15ppi?
Cheers,
Paul
Similar Threads
-
can any one identify this wood
By tokoroanz in forum TIMBERReplies: 9Last Post: 26th January 2012, 11:17 PM -
Can anybody Identify this Wood?
By alski81 in forum MUSICAL INSTRUMENTSReplies: 6Last Post: 25th November 2011, 11:27 PM -
Help! How do identify planes + establish what they are worth?
By Here's Hoping in forum HAND TOOLS - UNPOWEREDReplies: 11Last Post: 22nd March 2009, 09:59 PM -
Anyone identify this wood
By Bodgy in forum BOX MAKINGReplies: 19Last Post: 25th July 2007, 09:51 PM