Thread: Stanley Bench Planes Replacement Blade Bulk Order

Originally Posted by DJ's Timber

TS, could you put me down for the last 2- 1 3/4" no 3 blades + C/iron if they're still available thanks

Dj I have put you down for two 1 3/4" Blades plus cap irons.

Originally Posted by thumbsucker

Dj I have put you down for two 1 3/4" Blades plus cap irons.

Thanks TS, could you also put me down for two- 2" no 4 blades + C/irons as well

Originally Posted by DJ's Timber

Thanks TS, could you also put me down for two- 2" no 4 blades + C/irons as well

Done.

• We have about 18 Stanley Plane Blades left.
• We have 6 sets Chisels Left
• We have 90 mm @ 40 x 4 mm M2 for Plane Blades
• We have 120 mm @ 50 x 4 mm M2 for Plane Blades
• We have 550 mm @ 50 x 6 mm M2 for Plane Blades
• We have 610 mm @ 60 x 6 mm M2 for Plane Blades

Hi Thumbsucker, just picked up this great initiative of yours from your recent post in the Japanese Hand Tool thread.

Looks like I'm just in time.

Please put me down for two Stanley replacement blades: 1 x 2" + C-iron and 1 x 2 3/8" + C-iron.

I would have gone for 140mm @ 40mm x 4mm for a wood plane, but there is only 90mm left of that width. Could I pay for 140mm @ 50mm x 6mm but get it as 140mm @ 40mm x 6mm?

Many thanks

Neil

TS

I have mentioned the plane blades and chisels to a mate and he wants in.

To make it easy he wants the same as me so can you double up my order of plane blades and chisels, including ferrules.

We would be down to a handfull of chisels now!

Neil I have put you down the two Stanley Plane Blades, I have dropped one of my 40 x 4 mm blades, so that you can get your 140 mm x 40 x 4 mm blade.

Kapex I have double your order for Stanley Plane Blades and Chisels.

• We have about 12 Stanley Plane Blades left.
• We have 5 sets Chisels Left
• We have NIL @ 40 x 4 mm S390 for Plane Blades
• We have NIL @ 40 x 4 mm M2 for Plane Blades
• We have 120 mm @ 50 x 4 mm M2 for Plane Blades
• We have 550 mm @ 50 x 6 mm M2 for Plane Blades
• We have 610 mm @ 60 x 6 mm M2 for Plane Blades

Originally Posted by thumbsucker

I have dropped one of my 40 x 4 mm blades, so that you can get your 140 mm x 40 x 4 mm blade.

Very kind of you Thumbsucker!

Many thanks

Neil

Hi TS,

You already have me down for a set of chisels - I'd like to add two blades to my order if they are still available - one 2" and one 2 3/8" blade + C/irons for both.

Thanks,
Geoff

Originally Posted by gimjam

Hi TS,

You already have me down for a set of chisels - I'd like to add two blades to my order if they are still available - one 2" and one 2 3/8" blade + C/irons for both.

Done.

• We have about 5 Stanley Plane Blades left.
• We have 5 sets Chisels Left
• We have NIL @ 40 x 4 mm S390 for Plane Blades
• We have NIL @ 40 x 4 mm M2 for Plane Blades
• We have 120 mm @ 50 x 4 mm M2 for Plane Blades
• We have 550 mm @ 50 x 6 mm M2 for Plane Blades
• We have 610 mm @ 60 x 6 mm M2 for Plane Blades

Ts

this order is getting down to the wire

when do you anticipate requesting payment?


ian

Originally Posted by ian

Ts

this order is getting down to the wire

when do you anticipate requesting payment?


ian

Hard to tell, but sometime in the next three weeks, we should start with the Stanley Plane Blades at least. The chisels will take longer as we still need to fill the sheet.

Would it be any benefit to maybe let some others in on this order from other forums so as to fill the sheets.

TS, some time ago (post 628) you floated the option of getting plane blades without a primary bevel at a cost of $27 each rather than $33 each with the bevel. Is this an official option? I ask because while the 4 chisel options are outlined in the PDF, there is no mention of this cheaper option for plane blades.

TS

Please put me down for
1 x 1 3/4"
1 x 2"
1 x 2 3/8"
plus the cap irons

I'll also go a set of the chisels finished to stage 3 along with the fancy ferrules.

Is there a chance to get extra ferrules?

thanks